Viewing all customer Discussions for:

58-183 .187 T-Slot Offset Hollow Foam Seal,12ft

Hi, as you see the design of gasket on the end that's the shape. The windows come out so you can slide the weather strip into the groove on the outside of window. We purchased MW at Lowe's back in 06 or 07 I need 5 that measures 26 3/4" inches all for bottom of windows.

Aluminum windows, no visible numbers or mfg markings. Channel is 1/4" Overall plastic piece is 5/16' overall height w bubble is approx 7/8" but sponge bubble is pretty deteriorated.

Hello,I hope your weekend going well.I've used silicone and lithium oil and still not working both side keep squeaking.Thank you for your help in advance.The window has a 27C with hook attachments

I need tio replace ther weatherstrip at the bottom of a vinyl Certainteed window. It snaps into a channel at the bottom of the window. Any idea of where to obtian?

Attached photos are of bottom outside seal weatherstripping from Gorell model 5305 double hung window. Need replacement weatherstripping.

Need stripping that looks like that to slide in underneath the bottom of my double hung windows

The outside seal needs replacing.

I am looking for this tilt latch. Is it 26-021, 14447 or something else?

What seal do I need? Outside bottom sash seal on a Simonton vunyl window I think it's 58-183

Need 12 new seals for 2 different width windows. can you send a sample to make sure it's correct part? Theres a picture of the label off the window with what looks like window/part numbers H-R20-46x77 H-R25*-38x77 H-R35*-38x77

I hope these pictures will help figure out this weather stripping. It is in bad shape on all windows. I have 5 windows with this strip across the bottom. The sides have a different strip but I would like to got the bottom replaced before I get to the sides.

I looked on your website and could not locate a match for this glazing. Can you assist with a product sku or item number that will fit my application? Thx Dave

I am in dire need of replacement weatherstripping for my Certainteed windows I have 5 of these windows that measure 27" X 43" and all the weather stripping is in need of replacement

My window sills get cold, colder than the wall and colder than anyplace I can touch on the window except maybe inside the track. I'd like to try replacing the weatherstripping at the bottom of the window. Could you identify some replacements for me?

Could use 6 pair of clips and 8 window sash seals

I have a piece of foam insulation what was bent out of shape and had to be removed and I'm trying to figure out what to buy to replace it. It snaps into the frame as shown in the photos. Thanks!

Need help in identifying correct T-SLOT OFFSET HOLLOW FOAM SEAL part. Appears 7/8" wide, bulb ~ 3/8 to 1/2" and T ~ 3/16". Pictures attached. Mick

Need help selecting replacement part for this stripping.

T Slot is .187 Bulb is 7/16 Total width is 7/8

Hello, This seal is from a 20 year old American Jewel Double hung vinyl window. It is the bottom seal that meets the lower sash or window sill. I tried to get the best pics possible. I hope this helps idenify it. I could mail it to you as well. Thanks Mike