Viewing all customer Discussions for:

58-183 .187 T-Slot Offset Hollow Foam Seal,12ft

Can you send me a cost on the replacement weather strip. Let me know if you need more information.

Attached is a picture of weather strip off of a Atrium window. We have been in contact with them and they do not supply that part anymore and gave me your email. MFR. Code AB-1, Series 7700/7730 SH, H-R30-48x72, H-R50*-36x72 (MODIF). This is off a sticker that was on the window and there is no ot ... (cont.)

Hi, Looking for vinyl weather strip for tilt window. I don't have any markings on the window to identify the manufacture. The vinyl strip is on a T track like system. The second picture shows the vinyl dry rotted with the track exposed. Thanks for any assistance

I can't find any info about my windows, but the weather-stripping appears to match some on your site. Not sure about the exact dimensions.

Do you have any replacement window weatherstripping similar to this? It goes on a Danvid brand vinyl single hung window manufactured in 2000/2001. I have also attached the window manufacture sticker if that helps. Thanks Steve

I recently bought a 1947 built house in Tampa with the crank style (Jalousie?) windows. Here are the pics and measurements, best I could measure of the 2 types gaskets i need. Any suggestions? A: 9/32 or 5/16 x 7/32 dia x 3/32". B: 3/8" x 6/32" dia. x 3/32".

I am trying to replace the weather stripping in my windows. I believe they are MW circa 2001. The measurements are as close as I can get. The piece is pretty mangled. Thank you

1/4" from bubble 1/2" overall length

The attached documents are from Western Window in regards to the weather stripping I need. They believe this will take the place of the CertainTeed weather stripping, but they only have it in white. I need it in almond. My CertainTeed double hung windows were installed in 2007. Is this something ... (cont.)

Please see attached photo of a window seal that I am trying to replace. I believe I have identified this weatherstripping on your website. I believe it is the .187 T-slot Foam filled bulb weatherseal. The t-slot on my sample is 3/16". The bulb is approximately 3/8" diameter. The total height of t ... (cont.)

Searching for replacement bulb weatherstripping which kinda meets your 58-182 spec, but the dimension of 5/16 is not enough. The one I have is at least 3/4", closer to 7/8". I do not see that same dimension on the detail sketch for 58-164 bulb weatherstripping. Can you provide the full length to ... (cont.)

Hi, I have several windows where the outside part of the window weather strip is tearing apart. I believe the windows are Simonton, but can't find anything on the window that lists the model. The 30" windows are about 14 years old. Looking for part to order. I included the measurements on the pho ... (cont.)