Viewing all customer Discussions for:

58-183 .187 T-Slot Offset Hollow Foam Seal,12ft

Bottom sash seal on vinyl windows purchased about 2004. Slides into t slot on outside vertical face, seals on bottom bulb against sill. Need enough for 8 30" windows.

Hi in search of bulb weather seal to replace what has dried out for home windows. Please see picture attached. Please let me know if you carry as would like to order enough for 18 windows.

The "t" piece is 5 mm overall but the upper leg is longer than the lower.

I am trying to replace the Wool pile and kerf mount bubble. I believe I have the correct ones. My next problem is the bottom weather strip. Attached is pictures of the weatherstrip, the part that fits in the groove also shown is 3/16. Since I am unable to locate on website, is possible for a sub t ... (cont.)

Would you have Bottom replacement window weather stripping for KAS-KEL Saratoga 4000 series see pictures I haven't taken any measurements just yet. Need about 26 feet I believe, hope you can help Thanks Joe

Im trying to find a replacement seal for capitol windows.

looking to replace on 9 window's

Our house is twenty years old and the weatherstripping has deteriorated. Not sure of the exact manufacture of the windows but our builder said it could be one of three manufactures. Croft/Danvid or Mi-P-140. I know it is a T-slot foam filled bulb weather seal not sure if it is the .187 or .270. I ha ... (cont.)

Will the product code 58-182 and 58-183 fit and seal the same window. If so, which seal is considered the best to use. My original windows appear to have the 58-182.

I have no markings on the Windows at all.

I need to know what parts to order. I need the lower window seal, and also some of the t post and slides as the do not move easily. Thank you for any help

This is the lower seal that I need to replace on all windows

I have recently replaced my windows and am in need of replacement bulb seal. I was told that you guys carried this product so I am enclosing a sample to match up. If you do handle this item, please respond to me at the following email address so that I might place and order.

3/4" by 3/8" foam filled

Here are the pictures of the seal I'm looking for, what I ordered is to small. Please let me know if this is

Hello I am in need of weather strip for the window mentioned above. Pictures are of the weather strip and the window where it installs. The T slot on weather strip measures 3/16 inch. The weather strip bulb measures 3/8inch. The overall width is 1 inch. The number off the window is 50870. Hope tha ... (cont.)

The weather stripping for my windows is coming off. Can you please help identify the park so that I could purchase it. Thanks

Replaced my windows in 2005 with vinyl double hung Windows with half screen. Noticed that my weatherstripping at bottom of window has deteriorated from weather. Where can I get replacement

The bulb-type weatherseal on these windows is falling apart. I believe your 3/16" T-slot foam-filled bulb weatherseal, PN 58-182, will be the correct replacement. Please review the attached pics and drawing to confirm this for me. The extrusion is a little different than that shown in your on-lin ... (cont.)

I need part number of this weather-strip. I thinks that is for a Keller window