Viewing all customer Discussions for:

58-183 .187 T-Slot Offset Hollow Foam Seal,12ft

3/4" by 3/8" foam filled

Here are the pictures of the seal I'm looking for, what I ordered is to small. Please let me know if this is

Hello I am in need of weather strip for the window mentioned above. Pictures are of the weather strip and the window where it installs. The T slot on weather strip measures 3/16 inch. The weather strip bulb measures 3/8inch. The overall width is 1 inch. The number off the window is 50870. Hope tha ... (cont.)

The weather stripping for my windows is coming off. Can you please help identify the park so that I could purchase it. Thanks

Replaced my windows in 2005 with vinyl double hung Windows with half screen. Noticed that my weatherstripping at bottom of window has deteriorated from weather. Where can I get replacement

The bulb-type weatherseal on these windows is falling apart. I believe your 3/16" T-slot foam-filled bulb weatherseal, PN 58-182, will be the correct replacement. Please review the attached pics and drawing to confirm this for me. The extrusion is a little different than that shown in your on-lin ... (cont.)

I need part number of this weather-strip. I thinks that is for a Keller window

Jeld Win casement window bubble seal. Looks like it might match up to 58-183, but bubble looks a little small in comparison. Looking for a suggestion. Thank you, Tate

I need new seals for my windows. House was built in 2002. Double Hung Vinyl Windows. I was told they are Ply Gem. See included picture. This is the bottom seal.

Need help keeping my window up. Attached is a photo of busted piece. Believe it is American Standard, 34 1/4 x 61 1/2. Will need multiple right and left u shape plastic pieces that fit in this track. Will also need bubble seal. Total of 7 windows at 34 1/4 x 61 1/2 and 2 at 35 1/4 x 35 1/2 ... (cont.)

Hello. I have 1998 era MW double hung vinyl windows. Do you have thi s weatherstripping?

My windows is from MI. I see your 58-183 looks very similar and 58-164 also look similar but without the foam. Will the 58-183 work for my window?

Looking to replace all my rotted window seals Don't know the brand or where to find them

I made a drawing, but I did not have a program to convert it to any forms that you would accept, so I took a photo of the screen. The second photo is the profile I was drawing. the third shot is the outside side of the strip. Will the bubbles keep the window from going down far enough to lock? ... (cont.)

Hello, We have Kolbe and KVW windows in our house, which was built in 2000. The weather stripping on basically all of the windows is shot. I'm hoping you can tell me what I need to replace the weather stripping for these particular windows. Correct me if I'm wrong! I've also attached photos of the b ... (cont.)

Hi, I am looking for a replacement bubble seal for my Moss windows and have provided several pics of it since I cannot seem to find it on your site. Please provide your recommendation for replacement. Thanks!

The piece is missing the rubber piece, I just need to know what piece to order

Please review my attached photos to see if you agree that I need Product 58-183 - 3/16" T-slot offset hollow foam seal 3/8" bubble weatherstrip. I was able to photograph a piece from a protected window but the exposed/exterior windows have the same stripping, they're just crumbling to the touch. ... (cont.)

I took picture I only hope they are good enough. measurements are 3/8" on foam roll and 3/16' on slotted piece please if you have further questions John K. Thank You

Hello, I'm looking to replace my weatherstripping. I have both a bubble and pile. Pile is 3/16" x 1/4" 58-127 (?) Bubble is 3/16" x .187" I'm not sure if I need 58-182 or 58-183. I've attached photos, if you can take a look at it and let me know what product I need. Thanks, Ari