Viewing all customer Discussions for:

58-183 .187 T-Slot Offset Hollow Foam Seal,12ft

I am trying to find the correct seal for our Jalousie windows. I attached a picture of the seal which has a 3/16" bulb diameter and want to know what seal you have that would work. Thanks,

Need to replace bottom weather stripping from jelly wen window. Number on window etched into glass is g402-01184-8703.

I recently purchased some Jeld-wen windows. On one of the double hung windows, the bubble weather stripping sticks out a bit and makes the window difficult to open. I called the retailer and they sent me to Jeld -Wen. They seemed familiar with the problem, but want me to fill out a report to decide ... (cont.)

Hello, I removed this bubble seal from our vinyl tilt sash window. The window is roughly 35 years old and I believe the company name was Vekaplast. We are in the process of replacing the pile weatherstripping and several balance rods. We have roughly 30 windows in total to evaluate. Any help identi ... (cont.)

I think it T slide 1/4 drop foam filled bubble seal

what seal do i need part number want both

Here's some additional information you requested.Lower window sash: 13#I was able to remove shoe & attached coils after opening up access. Both coils are marked 3.5. I'll attach pictures of the shoe with coils.shoe dim's: width:0.95'; length:1.0"; thickness:0.50"

The bottom of the 't' is 3/16". The top of the 't' is 7/16 ? the bulb is 5/16 high. This is from a silveline double hung approx Circa 1994. Please let me know if you need additional information. This weather stripping is on the bottom sash where it meets the sill.

Hello, I need to replace the weather stripping on some windows in my home. The replacement windows were installed when we purchased the home and there are no manufacturer labels or stamps on the windows. I have attached picture to help identify the replacement stripping needed. The base extensi ... (cont.)

Hello Swisco, I will be ordering American Craftsman parts for my windows and door slider 6' can You tell me the correct slidder wheels forthe 6' American Craftsman Slidders? I will be ordering also American Craftsman Double hung parts Pivot pins, Coil Balance Springs 16.7lbs window weight and Ti ... (cont.)

Looking to buy tilt latches, balance assembly, locks, and weather stripping for Simonton window. Picture contained window sticker. Thank you!

Customer #285159We need to replace our weatherstripping. We just ordered a set of balancesThe flat side is 3/8", The tube is 3/8". Which do I need?Thank you, Jean

I'm trying to which weather seal bulb I need. Hopefully the 2 phots will help, but I know these sealers have decomposed over the years as the original windows were installed in 1998.

Can you tell me what would replace this?

Looking to confirm the weatherstripping for bottom of windows. Pictures attached.

Please let me know if you have the same style. 58-171 did not work for me.

Looking for approximately 250 feet of this bottom window seal.

In need of replacing foam seals between bottom of window and sill. We purchased windows through Home Depot in early 2000s, pretty sure they were American Craftsman. Thank you, Lyle

Need replacement window stripping for bottom of windows.

I need to replace the weather striping on the bottom sash of three identical double-hung Alside windows. Can you please help me identify the part number for the appropriate weather stripimg? Thank You.