Viewing all customer Discussions for:

58-183 .187 T-Slot Offset Hollow Foam Seal,12ft

Please help me identify the correct replacement bubble seal for my 2001 Simonton windows

I would like to order some replacement bottom weatherseal for my windows. Attached please find a picture of the window information and an image of an existing bottom weatherseal. Please let me know how this material is sold (lengths) and the cost. Thanks, Warren

I'm looking for this weather seal for our windows. I can't see any markings on our windows or seals and unable to find this style in any big box stores. Hoping you could help!

T slot with bubble.bubble diameter 3/8 inch, t slot also 3/8 inch. Windows are 25 and 29 inches wide (length needed if replacement strips).

Please find the picture of my window seal....the base extension is quite worn, but what is there measures 3/8" and the bulb measures 1/4". I will need approximately 48' of stripping. Please advise me of what weather stripping I need to purchase. Thank you very much

A Need bottom seal material (weather stripping ) B Need balance parts Here are a few pictures They were made around 2000 Thanks Mark

I need to replace several balances and bottom weather seals on my windows. I have included photos of the weather seal, balances (both damaged and undamaged), and the pivot shoe. I removed the sash and it weighs just at 19 lbs. I have not removed any parts for inspection, but cannot locate any identi ... (cont.)

Simonton windows. Installed 2001. Cracked and worn mainly due to south facing windows.

I've got a bunch of 20 year old vinyl windows that are in good shape excep for the bubble seal at bottom Total height looks to be 1/2 inch Bubble looks to be 3/8 or possibly 1/4 inch Help me Obi Wan. Your my only hope

This pic is my old weatherseal next to the one I recently ordered from Swisco (58-182). The foam bulb is slightly smaller than the one I am replacing. So I believe I need to return 58-182 & order 58-183

Could you verify that this is a 0.187 T-Slot Foam Filled Bulb Weatherseal? It is from an older window (2005)It was damaged and this is the best profile I can manage.

Hello,I have a Certainteed window that needs its bottom weatherstripping replaced. I placed an orderfor your 5' Dual-durometer Weatherstrip (58-164-5) because the dimensions matched. The product seemed like a good fit (see attached photo) but unfortunately I think the T is too rigid. The original we ... (cont.)

The weather strip on the bottom of the window needs to be replaced. The pictures below should give you a good idea. Measuring the bulb at the end is 3/8" and the "T" shape appears identical to the one you posted from someone named "Gary". I also included a picture of the product number if that's he ... (cont.)

We are looking to replace a few tilt window latches that measure 2 11/16" x 5/8" (see attached picture. We also need weather stripping. See attached picture. Do you have any recommendations? These are Simonton windows that are 22 years old.

Gasket from bottom pane of window Couldn't get photo with part installed

Need assistance choosing the correct weather stripping for the bottom of the window.

Please see photo to help me identify a replacement for weather stripping on my windows. The picture is of existing weather stripping I am replacing.

I have a Milgard window Installed approx. 2000, Single Hung, Bottom tilt out, w/internal grid. Width is 25 13/16" clear glass. The Right and Left hand Balancers no longer work and am looking for replacements. There are 6 Milgard windows in the house and only one has this problem. All 6 have the rou ... (cont.)

Hello . I am looking for the weather seal for my window. It is in bottom and sits against the sill. I measured as best I can . Thanks?

Can you tell me what this is? It goes on the bottom of my window thanks