Viewing all customer Discussions for:

10-324 24" Shower Sweep With Drip Rail

The bottom seal slat of my shower door is coming loose. It is held in place by some sort of adhesive tape that is double sided and fairly thick. I need to replace it all as the seal part at the bottom is disintegrating. It is a Aquaglass shower. Can you help??

Hi I've attached a few pictures. I need to know what shower door sweep to buy. The metal piece that is currently on the door in the second picture is 21 1/2 long and about 3/4 wide. I don't know what type of vinyl sweep was originally in the door. The shower door is 22 1/4 wide. I took a pictur ... (cont.)

I request a part number for a replacement shower door drip rail. The current drip rail, shown in the uploaded photo, came loose after 15 years. The drip rail is 24 inches long, approximately 3/4 inch in height, approximately 1/2 inch in width, and has two holes for screws. Thank you. ... (cont.)

Hello, I just moved into a house and the shower is leaking pretty bad. After looking at the bottom of it I can see the seals are missing. Don't have a clue what pieces or seals I need. If you could help tell me what I need I would very much appreciate it. Thank you - Mindie

Bought house built in 1996, just has 2 vinyl strips to prevent leakage. Original piece must have worn out prevously. This vinyl fix will not last long. Question: Which product is best solution; I'm thinking 10-324. Also what is best way to remove vinyl strips that were put on with silicone? Thank y ... (cont.)

The water stays in the lip of the metal piece, then leaks on the floor when you open the door. I think a rubber sweep would work, but I don't know what to order. Thank you,Robin

I'm looking for a shower door sweep that has three screws to attach to the door. My old one has a grey plastic sweep. Do you have anything like that?

The sweep is breaking and needs to be replaced, but perhaps enitre drip rail needs to be replaced ? Can you help? Thank you!

help. I am looking for a shower sweep with drip rail that the house we just bought did not have one. I tried all type at Home Depot but to no help. I am looking at this Product Code: 10-324 but unsure if it will fit. Attached are photos of the shower door. Many thanks.

Dear Swisco, I need a replacement shower door seal. I've included 3 pictures. #1 is what I just bought that was too big to fit into the slot, and then not wide enough. #2 and #3 are pictures of the shower door. Any help would be greatly appreciated. Thanks, Ken

Hello, I was wondering if you have a shower door gasket that looks like this one. Thank you

This is a mobile home shower door. I cannot find the correct sweep. Can you help?

Looking for correct replacement

It will not let me upload the photos. If you email me I will respond with a couple of pics of the drip rail I am looking for. thank you, Jason

Good evening. I was attempting to fix this framed shower door but the bottom metal piece is missing. Not only does this keep me from reattaching the rubber piece but make the door difficult to open. It appears the missing piece makes the door sit too low causing it to strike the bottom frame. Also ... (cont.)

Hello, need a replacement vinyl sweep for my door. Couldn't find anything similar at Home Depot so I attempted to fashion my own (didn't work). See photo with a side view of the slot. Do you carry anything that would fit? Thanks!

Hi I 1ea chrome and 1ea bronze both 24?. They look like your 10-324

Hi, I have a Jacuzzi brand shower and the door sweep rubber is broken. I tried to replace the rubber but cannot as the rubber strip is fixed in the sweep. The sweep attachment is 21.5 inches long and the rubber strip is about an inch wide. Please advise on the best solution for this. Thanks, Dee. ... (cont.)

Hello, I need a replacement 3/4" X 24" shower door sweep seal. I have attached pictures of both the extruded aluminum channel and the seal itself to give you an idea of what we are looking for. Unfortunately, I have not been able to locate the seal anywhere. Thanks

Hi --- Mine looks that same 06095 Quick Learner --- one of the screws rusted and is stuck.. the back of the screw broke off, so I don't think I can remove it --- Based on your response above and before ordering the 24 inch 10-324 as a replacement, can you let me know if it has holes for screws --- M ... (cont.)