Viewing all customer Discussions for:

10-324 24" Shower Sweep With Drip Rail

Is the 10-327 the replacement rubber for the 10-324 sweep? Thanks, Wayne

I am looking for a replacement rubber blade for the door sweep of a Showerwal KD-0300. The sweep is 23.5" long, and the rubber blade is approximately 24" long x 1" high x approximately 1/4" wide at the base

I am looking for a drip rail with sweep which is 23 1/2" long. The shower enclosure is about 12.5 years old. Can I use your product code 10-325 as a replacement? ThanksRon

Hello! I have been researching this on-line I came across your web site and thought I would ask you.Our home was built in 2007. (We purchased it in 2019.) There was naturally a fair amount of dirt, mildew, etc. on the shower door. I think I did a good job cleaning it to the point where it doesn't lo ... (cont.)

Hi I'm looking for shower door bottom sweep for sterling neo angle shower. Model number is worn off, channel on door bottom 5/16 width, sweep at thickest width approx. 7/16" narrow top portion approx 3/8" I have added pic thanks pat

I would like to replace the sweep on the shower door. Not sure if all i need is a new rubber gasket or an entire sweep. Also is there a way to replace the gasket around the framed glass door. Mine is molded and looks disgusting to say the least. I have checked here in FL and no one can help me.. ... (cont.)

I need a new sweep. Door has a frame, 24 inch door. The sweep hooks onto the metal edge. Hopefully this shows up. Any ideas?

No sure if all I need is the rubber piece or all the sweeper, it mesures about 24 3/4 in long, the metal part looks fine , only about 2 yrs old. Please advise. Thank you

The magnetic strip on the door and frame have disappeared or fell to bottom. Also need door sweep needs replaced.

Looking for a piece of rubber to replace this piece at the bottom of the shower door.

Need replacement of swinging shower stall door rubber bottom trim. The measurement with photos. It has 3 nail holes on right side. Thank you for your assistance.

I don't see any numbers on it or the shower. I think it was bought at a Ace hardware..

Corner shower surround with approx. 22" door opening gray sweep torn. Door opens/closes freely however the hinge and adjacent metal is corroded so I am hesitant to attempt removal/unscrewing metal strip. I hope to find a way to divert water from continuing to enter metal channel and further damage. ... (cont.)

Having trouble finding a replacement shower door sweep. The insert shape is approximately 1/8 in

I need to find this door sweep for my Shower door. The t bar slides into a track on the bottom side of the door and then goes shut to keep water from splashing out the bottom of the glass framed door. I bought like 6 ft of it in the past but can't remember where I got it from. Please let me know i ... (cont.)

I have been searching everywhere to find this rubber sweep. It is 3/32 across top where slides in bottom of shower door. Not quite an inch in length but looks more than 3/4. Ugh! Like trying to find a needle in the proverbial haystack! Lol! Any help would be appreciated. I would also purchase comple ... (cont.)

Pic 4681 is the end of the rubber seal that I need. It is 27 7/8" long. Pic 4686 is the track that the seal fits into. The slot seems to measure 1/4". The unit is taped to the door.Thanks for your help.

Purchased a shower door bottom seal from you several weeks ago but it does not fit. Attached are the photos of the existing bottom seal can you advise if you carry this and price. Can I return my unused seal. Thanks James

Can 10-327 be cut for 24" drip rail? Thank you for your time Abbye

Hi,I'm a handyman in NJ asking abut thiis for a client. I've attached 2 photos of a shower sweep vinyl insert that I'm trying to identify and then acquire. It is held in place by a lengthwise metal plate that is held by 2 screws. The vinyl piece is 3/4" wide, and the triangular part at the top is a ... (cont.)