Viewing all customer Discussions for:

10-326 36" Shower Sweep With Drip Rail

Hi I'm Looking for bottom shower door seal. Thanks

10-327 col28 1/2. SWISCO38528-011I am trying to help my neighbor who gave me limited information about the part he wants. After further investigation I learned that he needs the bottom seal or blade for his shower door. photo attached. The old/original seal became hard, brittle and is broken abou ... (cont.)

Door sweep for shower door

Please see attached photos. Just need the vinyl shower door sweep. The aluminum drip flange is perfectly ok. Do you have some that matches?

hi there I was going to replace this whole shower unit only because of the seals but I figured maybe I take a chance on just finding the seals first can you let me know if you can figure out what replacement parts I would need.. I also consider doing clear Glass, and if I purchase the clear glass ma ... (cont.)

Do you have this part in a brass color? I have a AquaGlass shower with a brass door that needs a similiar part.

I have been trying to find a replacement strip for a shower door sweep. See attached photos. The lip on the top of the strip has a slight downward taper. The width of the track on the sweep is 0.15 inches. Thanks, Fred

Please respond.

Please advise me what model shower door sweeper number is this. My is JohnI would to order two pc please.Pls advise ASAP.

The shower door sweep as shown above with the drip rail needs to be replaced but since there is no name on either the shower or door we have been unable to find any parts. We are willing to replace both the sweep and drip rail if easier . The actual width needed is 25 3/4 inches . Is there a part th ... (cont.)

I need to replace the vinyl / pvc water seal on the bottom of my swinging shower door. It seems to be several peices I need. Can you tell me what to order? Thanks - Candace

Hi looking for the rubber replacement for a shower door sweep

Hope this picture is clear enough to identify part. Top tee shape is 1/4 inch wide. Drop down seal is 3/4 inch in length. Tee shape slides into a drip edge track on door. Thanks for any help you can find. Mike

The bottom seal slat of my shower door is coming loose. It is held in place by some sort of adhesive tape that is double sided and fairly thick. I need to replace it all as the seal part at the bottom is disintegrating. It is a Aquaglass shower. Can you help??

Dear Swisco, I need a replacement shower door seal. And I buy 2 for you and not working. Can you help me how I can retur the last one I buy to you guys back .can you let me now what is the correct seal I need thanks you

The water stays in the lip of the metal piece, then leaks on the floor when you open the door. I think a rubber sweep would work, but I don't know what to order. Thank you,Robin

I'm looking for a shower door sweep that has three screws to attach to the door. My old one has a grey plastic sweep. Do you have anything like that?

The sweep is breaking and needs to be replaced, but perhaps enitre drip rail needs to be replaced ? Can you help? Thank you!

Need replacement 36 or 72

Hi, I have a few questions about your Shower Sweep With Drip Rail: 1- Can I order model 10-325 or 10-326 without pre-drilled holes? 2- If not, how many pre-drilled holes are there in these models? Mine is about 27.5 in, and the locations of the holes do not match with your drawing, so I figure if I ... (cont.)