Viewing all customer Discussions for:

10-326 36" Shower Sweep With Drip Rail

Dear Swisco, I need a replacement shower door seal. I've included 3 pictures. #1 is what I just bought that was too big to fit into the slot, and then not wide enough. #2 and #3 are pictures of the shower door. Any help would be greatly appreciated. Thanks, Ken

Hello, I was wondering if you have a shower door gasket that looks like this one. Thank you

This is a mobile home shower door. I cannot find the correct sweep. Can you help?

Looking for correct replacement

It will not let me upload the photos. If you email me I will respond with a couple of pics of the drip rail I am looking for. thank you, Jason

The glass door is 1/4" thick and 66 3/4' tall: This needs a flap to seal the water from coming out of the shower. The door frame has a 1/4" T shaped slot that the previous sealer was contained. The pictures of the door sweep shows 3 screws that locks in the sweep bar. I sent you a copy of the h ... (cont.)

Thanks for your help. Here are 2 photos of what I now have. John R

It looks like there are predrilled holes on the aluminum drip rail to screw into the framed door. How many are there and how far apart are they? Also, my shower door is 33 1/3 inches. Can this drip rail be sawed?

Hi - I need to replace a shower door sweep that slides into the bottom of a hinged shower door. It is a T top - the top of the T measures 1/4 inch across. It is 36 inched wide and 1 inch deep. Can you please help? Thanks

. one is the plastic bushing that goes onthe hinge peg, black The other is the plastic for bottom sweep and side seal that goes into a T- slot/track in the door. Shower is LASCO 20 years old, but not sure what brand the door is.

#Could you please give me the inner dimensions of the drip rail, touching the shower door of #10-326. From your diagram, it kind of looks like an "L". I especially need the height of the part pouching the door.

Hi: looking for a replacement. Please help.

this shower is 29 years old .....the door across the bottom is 30 1/4 ' the part is 30" the holes ar on either side and in the middle.

Hi I took apart the bottom of the shower to clean it and forgot to pay attention to where the grey piece goes when reattaching. Any chance you might know? I also would love a replacement part for the metal piece. The shower handle says Work Right but I don

The second and third holes are approx 8.75

Single shower door clear door seal ,but mounted on the door framework at base

Hi, I have attached two photos of my door sweep. It would be great if you can recommend a replacement part. Thanks!

This is a 29" swinging glass door. Any clue on what I need to replace this strip with? Do I need to replace the whole bottom part after removing two screws?

Looks to be longer than 1inch to stop water from coming out. Please advise! Thank you for your expertise! LJ

Hi could u help me find the correct shower door sweep When I went to clean it I pulled the plastic part out and it just kinda fell apart Went to Lowes they said I should buy new door My husband isn't very handy...but I still love him So I usually end up doing these things Any help would be gre ... (cont.)