Viewing all customer Discussions for:

10-326 36" Shower Sweep With Drip Rail

I need to replace a black rubber sweep on a shower door. I do not know the door manufacturer. The sweep is about 3/4 of an inch wide and has a semi round about 1/8 in top. See photos. Where can I get the rubber sweep or do I need to replace the sweep holder also? Thanks! For your assistance. Don ... (cont.)

The photos are showing 2 sections of inner shower door one with seal in place and the other with seal missing from extrusion. The last picture is just of sliver of the piece that fits in door. I purchased a piece 10-319 but it isn't even close to correct piece flap is too small. Hope this helps. Tha ... (cont.)

Hi. Water escapes my shower, and I was told I am missing the door sweep. The ones on your site seem to have the screw holes in different places than mine. This shower door is 27" wide. It seems I would need a 25" or 26" door sweep. There is 21 1/2" between the screw holes. Do you sell anyt ... (cont.)

Here are 3 images and a sketch of the gray vinyl sweep I am trying to replace. Kindly let me know if you might have it. Thanks

The seal for our shower door was missing when we moved in 3.5 years ago. I couldnt find the right part and we don't want to replace the entire unit because we plan to remodel in a few years. I'm not sure what type of seal we need, but this is what the door looks like. Do you have anything that would ... (cont.)

I need a tough vinyl or rubber sweep with a t-shape, no more than 1/2 inch wide to slide into the opening in the attached picture. the sweep itself, which seals the area between the bottom of the door and the frame, is about a quarter inch wide

The width of a T part is 3/16. There is no manufacturer'name anywhere.

I need to find a replacement for my shower door sweep. The tee part is one fourth of an inch. The sweep is three fourths inch wide. I have been unable to locate a replacement for it. Hope you can help.

The bottom flap or water stopper needs replacing. Do you sell that part and the screws? Please advise, Tracy

I am trying to replace a shower door flap for a 20 year old Aquaglass Shower stall. I ordered Item #10-319. It fits in the slot of the drip piece but the flap portion that keeps the water in the shower is about 1/2" shorter than the original part and allows the water to leak out. Any suggestio ... (cont.)

Need your help to identify vinyl door sweep which fits in metal drip edge on Centec Pivot CH 1631 Century Bathworks door. Measures 36" long and 1 7/8 high. I did a little drawing to show you the profile too.

Hello, I have a 32" brass shower door I would like to order a drip rail for. It looks as though you offer a 24" and 30" in brass but not the larger 36". Could I order a brass 32" drip rail? I'll also be ordering 2 24" chrome shower door drip rails. Thank you, Sean

Hi, I would like your product #10-326 in an oiled bronze. This style, oiled bronze, is available in other lengths but I am not able to find it in the 32" or 36" lengths. I really need a 32" length but can cut the 36" down to size if it is available in oiled bronze. Thanks. Henry

Hello, Can I use a frameless shower door sweep like 10-328 or 10-331 depending on glass/door frame size to replace a shower door sweep like one that like 10-324, 10-325 or 10-326? The frameless sweeps look/seem so much better and appear easier to install. I appreciate your help and look ... (cont.)

Water continuously get under the drip rail and sweep of our hinged shower door and mold forms. The photos show the door with and without the drip rail and sweep in place, I took photos after I had cleaned both. I ordered item 10-326 and don't know if I should screw it on or hold it on with caulk ... (cont.)

How does it attach, is it screwed on or with an special adhesive tape?

Gasket is missing. Do you have one? Looks like it screws behind the water shield. Should I just put a whole new replacement shield with gasket?

Long side is 5/8". Side fitting into channel is 3/16" - see pic.

Need to replace worn out door sweep of my 15 yr old swinging shower door.

There is not a complete image of the 10-326, does it have 3 screw holes and what is the spacing of the holes? I do not want to have to drill new holes in the shower door, so I want to make sure this part will work.