Viewing all customer Discussions for:

84-106 SS Spring Tension Screen Door Roller, 1" Nylon Wheel

I need to replace my screen door rollers again (5 years) due to rust from living near the Gulf. The roller type is the M spring type 84-001, or 84-031, or 84-007. The screws used for tension are also rusted. Is there a roller and screw that you could recommend that may not be subject to quick rustin ... (cont.)

Here are two different views of a roller off a Pella screen door that is probably 25 years old. Looking for two replacement parts. There are no marking on the part or the screen door or the sliding door. Only the name Pella on the glass door. Please help. Thanks,

I submitted previous photos about this project. I ordered 4 - part # 84-106.I replaced the rollers at the top of the door easily.These pictures are for the rollers on the bottom of the door. they seem to be different than the top rollers. There are screws on the edge of the door, but they can't b ... (cont.)

Ineed 24 of these

The first two photos are of the top of the door, the 3rd and 4th are of the bottom. The bottom 3rd pic does not rotate, the 4th does turn but does not protrude below the door. The top rollers are fine. But there is no screw holding them in place. They seem to be in a slot in the frame. I don't ... (cont.)

Can not find correct roller for my 1900 series patio door screen. Please help

I don't see any markings on the screen door. I can send photos of the French door if you need. There is an adjustment screw on the side, but removing it doesn't loosen the roller. I have seen YouTube videos where you can pry the roller off the retaining clip, but this roller is spot welded to the ... (cont.)

Best I can door for these parts to the screen door. If you have the parts will order.Mike

Need help with part number please. Thanks.

I need theses parts, four each

I need 2 adjustable bottom rollers for the above mentioned screen. Pics included. The door is nearly 20 years old.

I had a year ago purchased this model, but in ordinary spring steel, which rusts out in less than one season !. I would like to replace all the rollers with the 84-106 version, which is advertised as having a SS spring. However, can you tell me if the wheel carrier is still aluminum, or is that al ... (cont.)

Screen door rollers : Do you have item# 84-001 with a stainless steel spring? Or one that would work for this application, in stainless steel. This regular item is rusting out in a matter of months, at the ocean front property we are managing. Thanks for your soonest reply. Tom