Viewing all customer Discussions for:

18-159P Top Sash Guide Pair (LH/RH)

I searched your website and did not find any match. Please help to identify the part. thanks

Hello, We found that one of our top sash guides was broken, but we're having trouble identifying the specific part. Are you able to assist based off the picture? It's roughly 1" wide x 2 1/2" long. Thanks, Kris

seeking this part

Mine broke, it is 2 screw hole, 7/8" large end, about 1" on the sides, 5/8" smaller end, about 1 1/2" long, with a shovel end, in the middle it is solid,(not a see thru slit..like your foto looks like); your # 18-064 looks like the correct replacement, is that right? Thank you Marie ... (cont.)

Hallo I already order couple times from you It's great parts I already have selected balancers and want to add couple things Top sash locks (seding picture) And from last order I measured wrong and missy to trim channels canI buy some channel rivets? Thank you Bruno

Looking for this window parts hope you guys can help you can call or email me my name is Alvaro and work for Hotel is where I need those parts for

B 32-4 Stamp. Because of size requirements, this is all I'll send with this email. I'll follow

Hi. I need 12 replacement balances and 6 balance caps. The balances are 5/8" square and the full length of the metal is 43". Balance number engraved is 42S53. Also, the windows (aluminum) are installed in a masonry opening but we're not shimmed on the sides and need shimming. Do you stock shims? ... (cont.)

Trying to find this part for window that connects to my channel balance #3950. Second picture is the broken one Thanks

25" metal channel 5/8" wide Stamp: 24-4 LG5 CMC 54 We want to do a test on one window window so we would need a quantity of 4 But then almost all or all of them need replaced in the entire hotel which has four per room x 102 rooms, so It would be about 408 total quantity but I have to show them ... (cont.)

Looking for these, where to purchase please?

Pulled these window sash guides off a window and I never seen them before seeing if you guys could help me get replacements

I'm looking for specific part for my window. It is a plastic part that is in the top corner of the window that opens. It keeps the spring tension balancer in place. I attached three photos to explain it and was wondering if you had this piece and if I could order it. The photos are of the broken pie ... (cont.)

Can us know if you can found the part for us or any one to fit it.THanks

I need to replace this sash guide. It seems to be a match for the product code 18-188, but the 18-188 doesn't have the cap on the top. The measurements are all the same. Any help with the available options would be very much approved.

There's no markings on the part or window

Need help identifying these.

I have a non tilt window, attached are pics of the channel balance and top sash guide I need to replace. The metal on the channel is 23 inches long, 5/8 depth, and 1/2 inch wide. 22 D is stamped on it. The top sash guide is 7/8 inch wide at the top

I have 2 windows I need channel balances for. I believe your model S390 has the correct ends and is the correct size channel. I have 34 and 22 inch long channel balancers marked 33 D and 21 D respectively. I plan to order pairs of S390-34 and S390-22. My question is: Are the 3340 and 2140 the correc ... (cont.)

I'll need 8 window balancers. The length is 35 " overall, the metal section without the plastic ends is 34" long. The width is 9/16" and the height is 5/8". Will also need 6 plastic stops that screw into the top of the sash, there are right and lefts. Will need 3 each. The square top is 7/8"×7/8". ... (cont.)