Viewing all customer Discussions for:

26-193 LH Rollyson Tilt Latch, 2-5/8"

Need a few replacements for these snap in sashes. Cannot find a brand for the window

IWC isn't in business any more. This window is about 33 years old.The dimensions are length 3 3/4" long, 3/4' wide, 2 5/8' inbetween screw holes.The frame is white but I would accept any color.Do you have something that would fit this window?Elaine

I could not find any names on the windows or the latches. Latch length is 3 1/2 in. Screw centers 2 5/8 in.

I am looking for these window tilt latches, both left and right. I am also looking for these shoes.

I have a series 0901 double hung window and need the slide replacement. What part would this be?

Can't find any this long on your site? Please send me the part number for either this 3 1/2" long part of the one you would recommend to replace it. Thanks!

Can we please get some assistance with identifying the parts in the attached pictures? Thank you in advance.

Dimensions are as follows: Length is 3.5 inches, Width is 7/8 inches Screw holes are 2.5 inches apart

Hi, I found NO markings, so can inform you that these are surface-mounted (NOT a corner type). Total length is around 3 5/8-inch. Width is 7/8th inch. Center distance of screw holes is 2 9/16inch. I need a minimum of 20.

These were at the top of a sliding window. Can you help me din these parts?

Hello, I am trying to identify a replacement bottom sash corner guide / sash shoe for an aluminum single-hung window in a brick-and-beam loft building. One of the two bottom sash guides is missing, causing the sash to twist and blow open in the wind. I have attached photos of the intact guide on ... (cont.)

I wonder if Swisco has latches that match or come close to matching the latch that I have sent images of. It is on a window manufactured in the mid-1990s by International. The window's model number is 6200. Thank you for your time and assistance.

This latch is 1 5/16" long and 9/16" wide. The two prongs that snap into the window mechanism are 5/16" long and centered below the thumb latch which is also 5/16" long. I ordered some latches from you a couple of years ago but they are too small.

I believe the windows are from 2015 most likely bought in sears so finding any replacements has been hard. Any help?

I don't know the name of the part in the picture but there are 2 if them in each side of the window that retract and pop back to lock the windows inside the channel and prevent it from rotating outside of the channel. Please help me locate the part. Thank you. ?

I need 8 of these hinges. Can I still get them?

Screw holes are 2.7/16 apart and 7/8 wide. 5/16 thick and 3.3/4 long

I would like to purchase four replacement sash release levers but I am not sure of the correct size. The measurements are 2" length and 7/8" wide but because the tabs that hold the lever in place are broken, I don't know the depth. I do not know the name of the window manufacturer. If you want any ... (cont.)

Hi, would you be able to reference these parts I need to order? I could not find them on your comprehensive website. See attached photos. 1) Tilt latch clip 1 1/4 wide by 1 1/2 - 2’ long 2) blue plug

Hello, Looking for a left and right hand replacement.