Viewing all customer Discussions for:

81-310 Roller Axle Repair Kit

We recently purchased a home that has a Pella sliding patio door that needs the wheels replaced. The wheel assembly is still in good condition but the wheel bearings are bad so I just need to replace the wheels. Would part 81-225 work with axle repair kit (81-310) work? Are there other wheels that w ... (cont.)

Received my order of five kits 81-310 and ten 81-236. Would like to know what type tool/tip do you recommend to "curl brad" the copper colored shaft end. I guess this has to be used with a bench press or bench vise. They cannot be pounded without precision because the shaft and wheel assembly has to ... (cont.)

Hi Staff, I don't see any names or marking on the roller. Attached is the picture and measurement. Thanks in advance, Jason

These are rollers for the sliding door on my boat. They don't have any part numbers. The wheel could be 1 1/2" possibly, but 1 1/4" is best.

We are not sure what brand the sunroom is. And lowes does not seem to have the same size and match up as this. The part has one wheel.

Hello, I saw a previous post describing a "KILIAN" Rochester/Toronto, unfortunately the photos posted show a different assembly. Mine is made of extruded aluminum and slides into to an extruded aluminum door. The roller assembly is held in place by weight and mating extrusion configuration. Thank ... (cont.)

hi please can you identify these rollers and tell me a price for four (same) replacement rollers? the ruler is metric (centimeters) and the rollers are in a 1970s mobile home. there are no markings on the rollers or doors. the slots in the rollers slide into the aluminum door frame. thanks ... (cont.)

Hello, I am looking for replacement rollers for an old V.E. Anderson (not Andersen) aluminum slider.

No other markings visible. Roller wheel for closet bifold mirror door.

Doors not closing properly, wheels need to be replaced and adjusted

I have a large sliding glass door on my house built in 1957. I'm unable to find a roller assembly that looks close. Can I use 81-272 to retrofit? The existing 1 1/2" nylon wheels are not concave. I assume I can drill out the existing rivets holding the old wheels and use the included axles. My ... (cont.)

HOUSE WAS BUILT IN 1967. ROLLERS ARE GOING BAD FOR THE SECNOD TIME. WAS ABLE TO FIND THEM THE FIRST TIME, BUT NOT NOW. WOULD LIKE TO KNOW IF YOU HAVE ANY ASSEMBLYS , OR JUST THE ROLLERS. THE ROLLERS ARE 1.75 IN DIA. WITH 1/4" HOLE. ON THE ROLLER IT IS PRINTED KILIAN SYRACUSE, NY. ... (cont.)

HI My name is Leo . I would like tu find this kind of accesories for my sliding door Thank you

I am looking for a patio door roller. The wheel is nylon with a 1 9/16" diameter.

My rollers have no casing. They have a pin through the middle which fits directly into the bottom casing of the door. I need 4. Can you help me out?

6 needed

I have a 40-year old, sliding glass door. The wheels are 1-1/2" concave. These are nylon. I don't see a similar housing on Swisco.com. Do you have wheels that would be a suitable replacement?

We ordered 2) wheels 81-225 and a roller axel repair kit a couple weeks ago, they did not work. We need rollers like the attached pictures with sizes, looks like they are nylon, the sliding door is an Arcadia steel sliding door.

The wheel dia is 30 mm, and the with is 7 mm , I need 4 pcs of the wheels, but i dont mind buying a part that has the wheel mounted (as long as I can use the wheels). Hope you can help me , reg Ivar

I think this is a Peachtree sliding glass door. My rollers have worn out. What rollers would I use as a replacement?