Viewing all customer Discussions for:

81-310 Roller Axle Repair Kit

I would like the wheel and the axle. I would like to buy four of each. I just replaced the wheel and it worked well, but I have another door.

The doors were installed in 1977. There are 8 doors total in 2 units we own. All the rollers need replacing.

Hello, I have balcony doors at my hotel that need rollers replaced. Upon removal of the roller mechanisms, the wheels say Saunders Engineering Corp. These doors were made about 1999/1998. I attached photos of the roller mechanisms please let me know if you need more information. I need them with nyl ... (cont.)

I BELIEVE I NEED THE 81-095. Is there a stainless steel assembly that will fit? Or can i replace the wheels and bearings with stainless. I have access to drill and hydraulic presses. I'm tired of replacing the rollers every other year because of salt air. I guess that's what i get for buying a budge ... (cont.)

need two sets of tandem rollers for an old aluminum sliding glass patio door. can't seem to find anywhere with the odd tabs. any ideas?

I am not a window technician, but it looks like I will need to drive out a pin in the casing/frame to remove this roller. This pin is also the pivot point for the height adjustment. Currently the doors have only 2 rollers per a door, but I am told I can install double rollers in place of the origina ... (cont.)

Greetings Starting a new discussion as the post had an error and directed me to email instead. The Steel ball bearings are missing on one of my patio door rollers. I'd like to replace both rollers and the axles, but I am having trouble finding the right size. I need 2 rollers and axles. Th ... (cont.)

I tried your single wheel roller, the 81-132. But those nubs on the side make the roller too wide for my door. Your 81-019 looked promising (no nubs sticking out), but there's that black post sticking out the side. That might cause the same problem.

Says Kilian - Toronto, CA - Syracuse,NY

Looking for a new roller. The door is from the late 60s aluminum sliding door

Do you carry this roller? Or sell a roller that will be Universal for this replacement?

Hi. This is an aluminum glass slider from 1960 installation. The bearings have seen better days! The roller has a kilian name on it. No name can be found on patio door. Please see attached photos. It does not appear that the roller can be replaced without replacing entire assembly. I'm really hoping ... (cont.)

Hi, do you have replacement arts for this roller assembly? Thanks David

pulled this well worn roller assembly out of a 1960 vintage sliding glass door, any idea if one of the available replacement units would work? I'm assuming the only way I could find this exact unit would be salvage from a similar vintage door.... thanks for any help

Greetings, I think my doors are in need of this part. I was wondering if the bearing itself is replaceable, or does the assembly need to be changed out?

Please look at the photos and let me know if there is a replacement for this.

I need a replacement part. The dimensions are the same as a 81-125 (2-1/8" x 1" x 9/16") with a Nylon 1-1/4" largest dia. (1-1/8" small dia) roller. There is a stamp of D-719 on the part with roller. These doors are likely 30yrs old. Thanks, Brad

Hello, I'm looking to replace my rollers with the assembly. There are two bigger ones and two smaller ones. I've posted pictures of them. I'm also looking for the two white plastic slides on the base inside of the door. I hope these pics help? These are off a 1988 36 ft.flybridge Tiara boat. Than ... (cont.)

Do you have something that would replace this hardware. The only markings I can identify are first on the wheel hub "OTI5"

I am looking for 4 door wall rollers that match these pics or ones that will work in place of these.