Viewing all customer Discussions for:

81-310 Roller Axle Repair Kit

Can't find any numbers on door or rollers need new rollers or parts to rebuild and track insert for replacement rollers

The bearings on my less than 2 year old door have died. I am attaching pictures of all the info I have and need to order new rollers. Please help with identifying the correct rollers. The purchase order numbers and warranty numbers are attached.

The body is plastic and the roller is steel

Hello, Do you have this style of roller? Can these be converted to anything that you carry? Best regards, Jessica

I don't the manufacture of my sliding glass door. The housing dimensions are 3-1/8" long, width is 11/16", height is 1", wheel diameters are 1-1/4", and the wheels are made of nylon.

Thanks for your help. I have a sun porch that is probably 30 or more years old made or sold by Patio Enclosures. They are still in business but won't sell me parts last time I called them. The enclosure doors and screens have this wheel assembly. It wears out on the doors. Been swapping roller asse ... (cont.)

It is a double nylon wheel assembly that is 4 5/16 inches long by 11/16 inches thick by 1 inch high with 1 3/16 diameter OD nylon wheels.

The bottom roller hardware on my sliding glass doors in my front hall closet is broken and needs replacing. Here are the pictures of the closet door and the rollers. The plastic piece on the roller is broken. All the metal pieces are fine. The dimensions of the broken piece are: Diameter 1 1/4 ... (cont.)

I need 8 Kilian rollers, each of which is approx one and 11/16"dia, 7/16"wide with a 1/4" shaft. The shaft snaps into the frame, which is 1/2" space. Can you help? I will remove them from a new assembly if necessary.

This piece is for my sliding screen door and has the rollers broken. Is there a replacement for this whole piece? Thanks

Length 3 1/8" Width 11/16" Height 1 1/8" Wheels 1 1/8" Wheels are metal w/ball bearings Thanks Darren

I spoke to someone yesterday who recommended that I send an email to your HELP line to get some assistance in obtaining replacement hardware for several closet mirror glass sliding doors. Below are photographs of the 2 types of hardware that we need. We will need 12 of the 2 wheel hardware and 4 of ... (cont.)

I need to get a replacement for the rollers for my sliding glass door. The plastic wheel does not hold up to the weight of the door.

Hello! Can you help me identify what rollers I need for my sliding closet door? The wheels are 1 1/2 inch diameter Thanks!

Wheel diameter 1 1/2", width is 3/8"

We are looking for 2 wheel assemblies for an older set of mirrored closet doors. One door has two complete sets with wheels and works well but the other door is missing two of the slide on wheels. We have the part that is screwed into the closet door, just need 2 of the wheel parts that slide on ( ... (cont.)

These are parts from a 30 year old set of mirrored bifold doors. The only writing I find is Kilian Toronto Canada syracuse New York. The spring at the top of pic is placed on the bottom of the door to hold the doors open. The second item is a pivot pin placed at the top and bottom corners on each ou ... (cont.)

I cannot seem to find rollers that match my current rollers exactly. The measurements of my current rollers are identical to the 81-030 rollover on your site, except the wheel diameter is 1 1/8 inch as opposed to 1 1/4 inch. I am not sure if the roller will work for that reason. My rollers have a ... (cont.)

Need to replace the wheels for the screen to our back slider. Can't seem to find a comparable fit. Thanks.

Dimensions: 3/4(w)x1"1/8(h)x1"1/8(d) Wheel: Metal(2 wheels) Letter "V" marking on the side