Viewing all customer Discussions for:

81-310 Roller Axle Repair Kit

Good morning - a contractor told me I was going to need your part numbered 81-156SS to replace on my sliding glass door, as they could not get the door adjusting mechanism to work. Of course I did not take the door out to double check - but when I went to replace it... pictured you can see the part ... (cont.)

Hello, I need to find these two parts. The roller on the bottom of the door. Also need a new handle which has broken. Please see pics. If you can tell me what these parts are and where to buy them on your website would be much appreciated. Thank you, Joshua

1-1/4" nylon wheels. 80mm total with wheel and 17mm wide at case.

Sliding mirror wardrobe doors 25 yrs old, need new rollers. Sticker says Carolina Mirror Company, Houston Texas. Do u have these on stock please?

patio door wheels need replacement part number

Do you have anything similar to your 81-228 with a nylon roller with a stainless steel ball bearing? (Ideally with a 1/4" Shaft)

Hello, I would like to know which part I need to order. Please kindly advise. Tracy Y

Can't seem to remove assembly but did get roller off. Can I order replacement rollers? If not, which assembly and how do I get it out? I have already removed screwLynn

Any chance you can identify and supply this roller from our aluminium patio doors. If you could just supply the wheel we could reinsert

Hello, My closet door wheel gets crooked, and it looks like in the photos. Please let me know which part I need to replace and the videos/instructions on how to do it? Thanks, Kim

Please note the angle of the mounting screw, indicated by arrow in ..389 of the pix. This seems critical and has proven hard to find.

need a pair of these for an oversized patio sliding door. Probably should have taken more photos, let me know if you need more info. The door is cross town at my daughter's house so it would be a couple of days before I can take it apart again.

Looking for 2 replacement rollers. Width 5/8, wheel diameter approx 1-1/16. Overall length 4-5/8. Thanks.

Looking for Kilian Syracuse / Toronto mirrored door rollers. Unfortunately, there are no model numbers or other identifiers. On the wheel, it does say "Kilian Toronto, Can. 2 Syracuse N.Y." Note that my camera seems to distort the size. The ruler should show 1.75 inches or 4.5 cm. Paul ... (cont.)

comes from an IGA sliding patio door

I need to replace this double roller assembly on my sliding glass door Length: 3-1/8 Height: 1-1/8 Width: 3/4 Wheel Diameter: 1-1/8 Anchor screw is above the leveling screw. Both on the end. 2 metal wheels ** DOES THIS COME IN STAINLESS STEEL??

Miles image0.jpegimage3.jpegRoller= 1"image4.jpegWidth at flair = 1/2"image1.jpegTotal height = 1"image2.jpegTotal length= 2 1/8"If at all possible, I'd like the lower track as well.It is 56 1/2" x 1 7/8 as shown below.image5.jpegThanks

My name is Michael, want to know if the part is available. If not, can I just replace the wheels? If so, is there wheel parts and tool to take the wheels off? Thank you so much for you soonest advise on what options are there for me.

I would like to replace the rollers on my mirrored closet doors (2). They are approximately 30 years old. I will upload a couple more photos in a second email.

Looking to find out who makes this and if I can buy replacement roller bearings. The roller has seized aft 30+ years. Side of the assembly has either 891 or 198 etched. Wheel is OD is 1 1/8 I measured multiple time to ensure it was no one inch or one and a quarter