Viewing all customer Discussions for:

81-310 Roller Axle Repair Kit

Please see attached. I cannot locate replacements. They appear to be 1904/4904 but have nylon wheels. The nylon wheels are press installed. Any help would be much appreciated. Thanks.

Greetings, Looking for replacement wheels for a glass sliding door. Thank you,Robert

I am not able to find a 1 inch roller glide

I need 2 sets of the whole assembly which includes wheels part and slider/ bumper with the screw to keep it in place. Sorry I don't know the proper part name. Please contact me if you need further questions or information. Thanks!

I need two of these but need help finding them please; otherwise, advise is appreciated. Thanks so much.

Hi There, I can't find these patio door wheels and I was hoping you'd have a recommendation for an alternative that might have the same function/size. There is an inner housing that slides down to adjust the wheel 2 1/8" Long 1 1/4" High 5/8" Thick 3/4" Thick at the end with the lip 1" Wheel Diam ... (cont.)

I've searched for hours online and can only find steel versus stainless steel with the dimensions of my roller assy. My house is at the coast and steel will not last long. It's the same size as your product code 81-181 which has rollers to large and will not fit in my door. An help you can provide ... (cont.)

Hi, This is my roller assembly / I got the photo off one of your videos. I need a part no. for a 1-1/4 inch stainless steel wheel. Also need a part no. for a stepped axle to fit the stainless steel wheel you recommend. I would prefer if the stepped axle were stainless steel also, but I can live with ... (cont.)

So this could very well be the original doors on our townhouse, and with us living less than 50 yards from the beach we deal with a lot of salt issues. We have been trying to locate 4 of these rollers and have had absolutely no luck.

Seems to be a brand X door. Sorry, my son thought it would be fun to take them apart and bend them all up. There are two of them on the door. There are no marking on the part or the door that we can find. Please help!

Wheel size is 1 1/2 inch It goes on a closet mirror door

Need this roller but in a vinyl wheel configuration.ThanksJohn

Patio door rollers - I need a pair! These are 1-1/8 inch high by 11/16 wide, with 1-1/8" tandem wheels

Do you offer a solution for this roller? If not is there another that could be used for the project?

I looking for replacement rollers and possibly the housing as well for the attached images. The house was built in the 57 and I think the sliding glass door / sunroom was added early to mid 60's. The frame is entirely aluminum . There are 2 rollers on each door panel . Each door is 48" x 81" approx. ... (cont.)

Hello, Please see the double roller part that is very hard to find. If you need the exact measurments please let me know, but I figured if you don't have anything close to this then why bother. Let me know. Thanks so much! Jared

Door was purchased from and installed by Tri State Window Co. in 2011. there are no identifying marks on mechanism. Rollers are ss, with a 1 1/4 od. Rollers are approximately 5/16 thick. They are attached to door via one screw. If you can match part, I would like to purchase 2. Thanks for your help ... (cont.)

Hello, I don't see any markings are numbers on the door itself but this is the wheel that I took off

I don't see any markings, hope you can help with the pics. Thank you.

Hi, I'm looking for two wheel assemblies. They look just like 81-129 but have nylon wheels. Inside is marked Southern Cast, Miami Florida. Top and end screw to frame. Likely original to the home built in '68, possibly replaced in '93 when the sun room was added. Thanks, George