Viewing all customer Discussions for:

58-186 48" Duo-durometer Door Bottom Sweep

Good morning--I have been looking to replace the weatherstrip on my exterior doors. I believe that your item 58-173 is what I need. I have attached a picture of the current weatherstrip together with a drawing (not to scale-obviously). Would you be able to send me perhaps a 1" piece so I can conf ... (cont.)

Looking to replace door sweep on Pella entry doors, 36" & 34." The same sweep fits each door. I have attached pictures below.

Ignore current wraparound weather seal seen on door. Id like to get replacements for the original seals which go into the channels.

I need a sweep for the door going into my garage. There are two shown in this the pictures .... I need the one on the right side.

Weather strip is 34 1/2 inches Door is 34 1/2 inches wide 3rd pic is backside of strip Thank you Mary

Need help identifying

No Markings Original French doors part Metal cased French doors with blinds sealed in dual pane window

Can you help identify this door sweep? Thanks! Andrew

please see images, it attaches to bottom of door with staples.

Need to replace door sweeps on two sets of French doors 28 years old - 1 -3/4 inches wide Looks like nailed or glued - no channel Cannot identify brand of door Saw your link in Handyman Magazine HELP - I've looked everywhere!

I recently found a draft coming in beneath our front door, so I removed the door and found the door bottom was damaged I found was appeared to be an equivalent at the local home store, but it turned out not to fit. This is a kerf-type door bottom with a combination of fins and bubble tubing. The ... (cont.)

Hello, Can you tell me if you sell a substitute for a Stanley door sweep? Apparently Stanley doesn't make doors any longer and we are having the same problem everyone else has had finding replacement sweeps. Thank you!

Hello, I am looking for a U Shape door sweep. the door is about 48 inches I need it in almond color.

Hi I have 4 doors that need to have the bottom seal replaced but am unable to find the right seal in any of our local building supply or hardware stores. I have taken measurements and pictures of the part. they look like the part #58-189 but is only a bit over 3/4 inch wide (front to back) and only ... (cont.)

doesnt look like you carry this sweep. I have been unable to find it anywhere. bulb and fin style that slides into two grooves on underside of door. any suggestions for where i might find this? thanks for your help.

I have 36" exterior doors (ESD in Fairfield, Oh) that I would like to replace the bottom sweeps on. The kerf measures 5/8" wide and centered on 1-3/4" thick door. Do you have this part?

I have received six (two orders of three each) 48 in Duodurometer Door Bottom Sweeps 58-186. Doors were thought to be 1 3/4 in. but are actually 1 7/8 in. Otherwise 58-186 would have been perfect. Three doors are 36 5/8 in wide and three are 37 1/2 in. Since threshold has sunk on the end of one ... (cont.)

weather stripping needed for Stanley steel entry door 3 pieces needed..2@80"..1@36" door sweep 36" thank you Paul

Door installed in1992. Need part. 29 inches bt 1 1/2 inches Sent earlier post but decided pictures would help

Length 35 5/8" Width 1 7/8" Fits door that is metal on outside and wood on inside Purchased 25 years ago- no markings or stamps