Viewing all customer Discussions for:

58-186 48" Duo-durometer Door Bottom Sweep

The weatherstrip appears to be nailed and or glued to the bottom of the door. there is no trackway or groove to allow you to slide the weatherstrip on. Looks like I would have to tear off the existing strip and make the surface flat. There are no mfgrs identification on the door other than Guardian ... (cont.)

Looking for a replacement threshold. Not sure of make or model of door. Attached are photos.

Can you help me find a new bottom door seal for a very old door (house was built in 1918). The distance between the bottom of the door and the floor is 2.5".

The door markings are Pella Insulshield A IGMAC P 3-05 I need door sweeps!

Bottom front door sweep

Need a new door bottom/sweep for an in-swing patio door. The glass is marked "insulshield", which makes us think it's a Pella door, but there are no identifying marks otherwise. It's two French doors, one fixed, the other in-swinging. The door measures 1-7/8" in thickness. The existing piece app ... (cont.)

I have this rubber piece that slides into the bottom of my storm door. It's 3/4 of an in wide, then the height of the 3 ribs are 1/2 in tall do you have anything that mite work. It just slides into the track. It was and Emco storm door.

2004 Therma tru exterior door . Will this sweep fit this door

I need the 48" door bottom sweep in dark brown or Bronze.

HOW THICK CAN MY DOOR BE? MY DOOR IS 1 3/4" THICK X 42" wide. HOW MUCH OF A GAP WILL SWEEP #58-186 FILL ON THE BOTTOM OF MY DOOR

Looking for a 34? door bottom for a 1990 vetter swinging patio door. Also need a roller for the same door?s screen.

Need replacement Door seals on bottom and side

Guardian (Taylor door) steel door, 36" wide. Need a bottom sweep replacement.

Single kerf vinyl door sweep for patio/atrium door

Do you have this Pella Door Sweep?

Bottom door sweep replacement woes... Help, =)

im looking for a replacement door sweep -- could you please recommend a part -- the door is 36 inches

Hi! We installed our Atrium doors in 2003; 14 years later it's time to replace the weather stripping at the bottom, inside and out, of each door. Can you help us locate the correct product(s)? Thanks! Dave

Was wondering what is the height of the seal that goes around the door

Need door sweeps for (what I have been told is)a Pease door. It is 36" x 1.75". Doors are steel covered, wood core entry doors. Also need parts or replacement thresholds for the doors. 2 @ 36", 1 @ 32". The thresholds are 6" deep, about 1" high under the door and .5" high outside edge. ... (cont.)