Viewing all customer Discussions for:

26-195 General Aluminum LH Tilt Latch, 2-3/16"

This is on the right hand side of the window. There are no markings on this part but the window lock has GA, which I'm told is General Aluminum, now discontinued. The screw holes are two inches apart. I'm less clear on the measurement at the edge of the window. I thought it was 3/4" from the "track" ... (cont.)

I need 4 of these clipsThe only info I have is that the windows say better-bilt on them.

Looking to buy parts if you can identify.

1999 house with GA windows. The release clip in the photo allows the window to tilt in. Any replacement parts for these? No part numbers.

I need to replace the tilt latch on my better bilt dbl hung window. My receipt from year ago (1999) says it's # 9350. Hope this helps!

Hellow I need replacement 28" Full Tilt Spiral Balances for 3 windows (approximately 36 x 60) See photos attached. Numbers on existing ones I found (pulled one side from each window) are as follows: J5B 1 HSA 0 FT A 0 Don't know if above characters are zeros or letter O's Please enlarge image ... (cont.)

I need replacement tilt latches for our Mastic windows. I

My Mastic windows are 18 years old. I'd like to replacement a couple tilt latches. Which one should I order? See photos attached. Thank you.

I have about 10 windows with this type of latch broken. The measurements are: 1 3/16 x 3 inches.Can you suggest replacement? Thank you!

Hello, I am unable to find this part on your website. It allows the top of the window to be released for removal. It is approximately 3" long and I have included images of the broken and unbroken parts. The window lock has the name 'Better-Bilt.' Please advise if you have this or an equivalent ... (cont.)

im looking for at least 2 of these spring loaded window parts fory mastic window. There are 2 on each window that holds the window into the frame and glides it along the track. Thank you!

I have DACO windows. I need 6 top tilt latches, 3 R and 3 L. My dimensions are between screws 2 3/16s, overall length 2 7/8s. distance between first screw and latch is 1/2 inch.