Viewing all customer Discussions for:

39-417 Tie Bar Guide

I need some tie bar guides that look like this one. I ordered a crank for the egress window awhile back maybe two years ago. there were no screws that came with the new cranks. the old ones were accidently lost do you carry the screws I need to install the crank?

This bracket is broken.

Looking for these plastic parts for my window to be able to lock it.

I need the plastic rod holders for windows with Truth multi point lock system. They have aged and brittle and are breaking off.

Need to locate locking bars and guides

Hi Swisco,Please see attached. The cranking mechanism shown has a gear that has lost some sort of bushing that kept the gears in alignment. I would like a new mechanism. If you have one with a folding handle, that would be preferred, but not necessary.I also have a separate window whose crank works, ... (cont.)

I have a crank out window that has a broken lock. There are 2 broken guides that belong to the slide mechanism that locks the window shut. They are 2 plastic guides that have lips that hold the window lock in place.

i am looking for this plastic mount for the locker. the window is a 770 case window, its 6 years old, the locking rod goes through this parts

This part is broken on one of my windows.

Hello, I need at least 5 of these if possible, they hold the flat rod on the side of the windows in place which interacts with the lever which locks the window. Hopefully you can help with this quest, can't believe BF Rich went out of business!Thank you, Marge

Most likely from the late 80's Winged Tie Bar Guide ?? Window imprint stamp says = WS-U IGCC reg CBA 12 Latch is on the left - right side swing. The metal bar has three circular nibs on it and they catch the plastic holders on the window itself. And then the plastic on the side window sill is what ... (cont.)

Looking for the bracket that let's the window locking bar slide and grip the window to hold it closed. Don't know make and model, but has 45149 on it. Thanks, Dan

Need bolt to hold on locking bar.

These are slide brackets that hold the vertical locking slide bar to the jamb. There are three of them. This appears to be an Alenco aluminum window. I will need about 10 of these clips. The windows would be From 1999. I would also need some of the control arms for the top and bottom of the sashes. ... (cont.)

I'm looking for the plastic piece in the circle that has the two screws through it. It holds the locking mechanism together. Runs on the vertical side of the window casing.

Please let me know what you think second request? Thanks

Can you help find this Truth Hardware tie operator: 3 Cyllindracal roller (middle roller more or less centered in the middle between the other two rollers) 34.9 inches length *It is not part 6-1481-35-3 as middle roller is not centered. What type of Truth Hardware operator is this? The photos show ... (cont.)

1402 Truth DEAL window made in India

There were no markings I could find

Do you have one of these?