Viewing all customer Discussions for:

81-278 Patio Roller Assembly, 1-1/2" Steel Ball Bearing

It fits inside a bracket that is in patio door still. The bracket is brass too and has a thread bolt keeping it in place and I can't remove the carriage. This part is about .75" thick let me know what else you need from me. and thank you

i have to preface this by saying it was really hard to get the wheel assembly out. it was filthy and the visibility was bad. the outer assembly had a screw holding it to the bottom frame so we kind of bent every thing up before realizing there was a screw. the outer assemblu got mangled. the wheel ... (cont.)

I have this roller on our sliding door but the door it's self is still good the rollers are bad is there any that could work in place of these

Please tell me what part I need to order.

Please advise what would be the replacement part for the screen door wheel? Thank you

Aluminum frame door. I don't have any photos of rollers installed. One is missing and the other has already been removed. Door is in a Somerset houseboat. markings on the roller are.... A-S 7873 NYC stamp steel housing, steel roller wheel 1.25 wheel size 1 5/16 x 2 1/4 x 1/2

Needing a pair of single housed wheels.

No marking or numbers

Several days ago we called about roller replacements. Here are the photos of the rollers.The first photo shows the lower frame which supports the glass and holds the rollers with a screw securing the roller assembly to the frame.The second photo shows the approximate dimensions of the roller assembl ... (cont.)

I need a roller and housing for my sliding glass door. I saw another person with the same roller as mine from a 2013 post on here. I hope you can find one for me. I hate to scrap out a perfectly good door just because I can't find the roller. Unlike the 2013 post, the measurement on the housing is n ... (cont.)

These rollers came off of sliding patio doors in a condo in North Myrtle Beach, doors in which lead to a balcony on a second floor that gets riddled with wind, salt water, sand, moisture, improper care, etc. A few of the other rollers crumbled as we removed them, as did the bottom of the sliding p ... (cont.)

Trying to find exact oart

I'm looking for a replacement for this patio door roller.

Looking for new rollers for above door.

Looking for replacement roller assembly for older trimview sliding glass doorRoller Only, 1-1/2 Diameter Steel Wheel 1/2" wide 1/4" hole

Hello, could you please help me identify this part. Thanks, Arseni

A-S NYC 7873 Hi, I want to replace the housing and roller for my patio door. What like part do you have? Thank you

Sorry for the rudimentary drawing....i am having trouble finding a correct replacement. Thank you!

Good day I am looking to replace the rollers on my mirrored closet doors. Photos are attached. The measurements are 2 7/16" in length; 1 3/8" in height and 3/4" in width. The roller is 1 1/2" in diameter and is made of nylon. I believe that 81-278 looks to be the best but I am hoping that you can pl ... (cont.)

I hope you can read and understand my drawings and writing? This sliding glass door was purchased at Lowe's approximately 25 years ago? Thank you for your help. Charles