Viewing all customer Discussions for:

81-278 Patio Roller Assembly, 1-1/2" Steel Ball Bearing

I need an entire roller for a sliding glass good. It's an older door and am not able to find parts locally . I need two in order to balance the sliding glass door

Looking to replace the roller assemblies for my patio sliding door, aluminum door.I do not know the brand of the door nor model number.I already sent a separate request under your Contact Us.Thank you,John

This (worn out) roller is from a sliding glass door on a 1999 Fleetwood mobile home. I've not been able to find a replacement that has the mounting screw on the top and another on end above the adjusting screw. Roller diameter is 1.5 inches. No identifying marks found. Thanks for any help you can pr ... (cont.)

Hello, please help us identify this roller and if you have it available for sale

Hi There, I'm trying to find replacement rollers for a sliding door. The only description I can give you about the door is, it is original to the house that was built in 1986. It is aluminum. The dimensions are as follows, length 2-1/4", width 1-5/16th", Thickness 7/16ths" and the roller diameter is ... (cont.)

Sliding glass door rollers, need 2

Roller for Swisco 5GD-R25 2 1/2" long, including tab 1 1/2" high, including roller sticking out 1/2" wide Doesn't match those posted on your Web site. Thanks for your help.

2 bottom rollers, one on each side 2 5/8 inch length about 5/8 inch wide 1.5 inch roller says disco 1165 on side

Hello, We've just recently purchased a home that was built in the early 70's. One of our sliding doors is difficult to move, and when I checked the roller assembly's, it appears that one of them is broken, and the other one has had is threads stripped from an attempted adjustment. There are no ... (cont.)

Hi. I'd like to replace these rollers. The door gets major exposure to the elements, so I'm open to suggestions, as there's a bit of rot where these rollers are found. Thanks, Mark

Krestmark sliding glass door rollers

Replacement Wheel hardware for Sliding glass door. Stamped on metal A-S 7873

Hi, We recently purchased a house built somewhere in the 70/80's - not exactly sure. The sliding doors are hard to open and I'm going to try to fix by replacing the rollers first but I have no idea who manufactured the door - can't find any markings. Any chance you can help with these photos? ... (cont.)

no existing numbers need one set thanks for your help

I need 2 roller

Approximately 1.5"x3"x.75" (HxWxD). Wheel is 1.25" diameter. Marking on top says "ASTR BEC OMCO" in a circle

3/4" width, 1 1/16" height, 1 1/4" wheel diameter. Wheel is metal

Please see attached top, back and side photos. Unit housing width = 3/4 in. Unit housing height = 1 11/16. Wheel diameter = 1 11/16. Wheel Material is nylon. Units are attached to glass door bottom aluminum rail with drift pins. Note that the end view shows the top phillips head bolt must be the adj ... (cont.)

Please see attached. I need two rollers, one for each end of the sliding glass door. Thanks. Marty

Need help identifying this replacement parts. It looks like it is the following?: PatioRoller Assembly, 1-1/2" Steel Ball BearingProduct Code: 81-278