Viewing all customer Discussions for:

81-278 Patio Roller Assembly, 1-1/2" Steel Ball Bearing

Hi I was hoping someone can help me find replacement wheels for attached picture. Top of bracket reads "ASTRCBEC OMCO" Thanks Matt

Hi there, I need rollers for my two patio doors. Thanks Robert

I am looking for replacement rollers for an Alenco sliding glass door since one roller has completely failed (roller fell off). The door handle assembly is a secondary concern since it still functions and could be replaced later. The broken roller assembly is shown in two of the uploaded pictures. ... (cont.)

Have an old glass slider. Handle on door says Viscount, not sure if that's the door handle manufacturer? Roller is 1 1/2. Can you suggest a replacement part number? Thanks

I have measurements that seem like this part is the right one. I believe it is Patio Roller Assembly, 1-1/4" Steel Ball Bearing Part # 81-279 I am sure on the 1 1/4" metal roller 2.5: case (which shows 2.58 in your drawing and I could be off that much)and the 1 3/8" height. Just checking for your ... (cont.)

I had to pry out the roller the device was being held inside the door frame by a screw mounted in the frame ( see top of roller part)

W 3/4" H 1-1/8" Steel wheel 1-7/16" Unlike all the YouTube videos, these where held in place by a screw through the removed bottom piece. FWIW, this is on a mid 90's mobile home patio door. Need replacement as soon as I can find them.

These are from a patio door manufactured in the mid 1980s

Hi, we need to order (100) 81-278:Patio Roller Assembly, 1-1/2" Steel Ball Bearing, I've been sending inventory alerts since 06/24/2021 but you still do not have this item, is it possible that you have a similar one that fits the description, pls let me know ASAP

This is the roller off a 7 foot sliding patio door that is 50-70 years old.

Need 2 rollers. There are no markings or anything on the rollers but the glass has a Guardian stamp on it.

photo is of sliding glass roller - circa mid 1980's Steel roller is 1.5" diam. Width of housing is 1/2". length of housing is 2 - 5/8" The markings on house appear to be L-S 7873 NYC

Roller adjustment for bottom of door.

The part that the screw threads into no longer will move to raise or lower the roller.frame is approx 3/8th of a inch tall.3/4 inch wide, and 2 5/8ths long on the main frame box. Thank you for your help

ASTR BEC OMCO - in a circle on the top 11/16" thick. the roller is 1 1/4" diam. These rollers are 20 years old. Pictured is the front roller. I assume the trailing roller is the same. I'd like to replace both. Thanks! Joe

I am looking for 4 rollers assemblies like the one in the picture . Attaching pictures of my originals rollers . Would like to know if you have them and how much do they each cost with shipping costs

I recently purchased 3 sets (6) wheels of item # 81-258 Adore Hi-Lite series 1200 Patio Door Roller Assembly However, they're the wrong size.Attached: are Pics of the correct wheel assembly in hopes you can find what I need.I will return 2 sets (4) wheels back in exchange for the correct wheels.Tha ... (cont.)

I need a replacement top guide, similar to your part 86-025 but mine is only 7/8" wide that must slide into the frame. Im also looking for better rollers, I have 1 1/2" PLPCI.net D 1822 rollers, look like your 81-261 product but they are so noisy Is there a replacement that has poly wheels? I nee ... (cont.)

Looks similar to the 81-278 1-1/2" metal wheel in what appears to be a brass housing. They are for a kiosk door at a gas station, nothing fancy. I only need one but I figure I should do all four while I am there.

Need new rollers for sliding glass door wheels are 1.5 inches, width 3/4", and length 2 1/2 inches.