Viewing all customer Discussions for:

81-278 Patio Roller Assembly, 1-1/2" Steel Ball Bearing

ball bearings crushed in this roller door track in good condition door is heavy hired someone who took out rollers was able to replace front roller from HD we'll see how long last MH home Palm Harbor built 1991 so assume sliding doors to sunroom installed at this time. I hope pictures are visible. I ... (cont.)

This door was installed new when the hose was built 20 years ago. The pictures are taken on 1/4" graph paper(I think). Unfortunately I did not measure anything or put a ruler in the pics for size (uhg!)

Please let me know if you carry this assembly. Thank youBob

Need help determine the replacement for this

Single roller, unsure of wheel diameter at this point. This is a heavy alum door and window

Need 6-8 replacements to match as close as the photos

Hi, I'm trying to identify the rollers on my patio doors. They do not have wheels like other types I've seen, rather small white plastic rollers. There is nothing on the doors to identify them but the hardware in my windows in the rest of the house appear to be made by "Sunrise". Any help appreciate ... (cont.)

Can you identify this part number for me?

We have an "ANSI AAMA 101-85 SGD-R20, Series M-800/M825/M850 door". We are needing replacement rollers for the glass sliding door, bottom.

3/4 inch wide x2 5/8 inch long. What do I need?

Rollers 2 only on bottom of door. Held in place by screw from edge of door and one from above. Markings: Row 1 "A-S" Row 2 "MYC" Row 3 "7867" Thanks for help locating part. Zack

Looking at the Del Mar web site, I believe this unit is SKU#F3727. I'm pretty sure this is a 1 1/4" wheel. These are used in a pool environment, and the doors become very hard to open or freeze up after a few years. We need 10 of these units. Would stainless steel or nylon wheels prevent this? ... (cont.)

I want to see if you have any of these in stock This is a picture of the part I need for the sliding glass door. There was no wheels attached. I only have the number ASNYC 7873. The bottom opening is 1/2 inch which is much narrower than most of the ones I've found. I would do appreciate your help I ... (cont.)

ASTR BEC OMCO written on top in circular shape, wheel is 1 7/16 inches in diameter,, 5/16 inch wide, interior case is 1 1/4x 7/16x 2 5/8, the exterior case is 2 5/8x1 3/8x11/16. Believe door manufactured by West Window in Martisville, Va in mid 1990s.

Hi, I would like to replace some sliding glass door bearings. I need 4 sealed bearings total. 1.5" x .25" Also 4 pieces of furry grey or black weather stripping. (Or if there is a better product you recommend.) .25" insert tab width. Length 36". Depth 3/8" Thank you, Jesse

I measured the wheel at 1.5 inches alsoIt measures 3/4 to 13/16 wideIt looks similar to Product Code: 81-278Thank You

I am looking for 2 roller assemblies. The wheel measures 1 1/4" . I understand that the manufacturer is out of business. Do you have an equivalent. All of the store roller are 5/8 wide and this is about 1/2. Thanks. Kelly

Need to know if I can still get this model roller or do I need to find an up to date roller.?

I am looking for a replacement roller and assembly for my A-S 7873 1-1/2" roller with single screw mount on the end. The housing width is 1/2" and height is 1-5/16" and length is 2-1/4"

I didn't see an exact replacement part in the inventory list. Any help would be appreciated. You can see the bottom panel was removed to get to the screw at the top that holds it in place. The back side has a retention screw as well right above the adjustment screw. These are older glass sliding ... (cont.)