Viewing all customer Discussions for:

S395-25 25" Series 395 Channel Balance

I'm trying to repair an old sash window with a broken pulley but the balances on it aren't even the same. Not only are they different lengths, but the end pieces are different. It seems like a past owner replaced one. The thing is, both seem to be incorrect to me based on the size and weight of the ... (cont.)

window balance channel. Installed in 1997. Manufacturer unknown. 1/2" wide, 25" long. stamp on channel reads 24 4 HP Caldwell

Hi, we have 3 doublehung Alenco windows that have channel balancers that are stamped 25C. We replaced the glass with a heavier glass and now the windows won't stay open. We were told we needed 25D or 25E for greater sash weight. The channel is 25" long and the width of channel is 5/8"x5/8". What ... (cont.)

Alenco window channel balance 2440.25" length of metal.1/2" width on closed side of channel.Thanks,Doug Happy New Year!

Please take a look at my photos and let me know the correct balancer replacement to order. Based on the guide I believe I need the 25" series 395, 2430. But, Here are my measurements: Channel width- 1/2 inch Channel length- 25 inches Sash weight- 16.40 lbs Thank you

This is from a ALENCO window from 1996. It has B.S.I. 2430 stamped on it. The metal portion measures 25 inches end to end NOT including any plastic. Both sides are broken so would need 2. Dont know if any other parts are attached or broken that I would need to make the repair other clips or someth ... (cont.)

Marking 2430

The rope on my window balance broke and so the window only hangs on one balance that has the rope intact. I took pictures of the balance and a picture of the sticker I found on the inside of the window. Could you help me figure out what I can replace this with? These are Atrium windows and the metal ... (cont.)

The number stamped on the channel balance is (h 2428 #). I need replacement channel balances for 3 windows, a total of 6 balances for this size. The window size is approximately 47" x 26". The channel balance I have looks similar to the 25" Series 395 but I'm not sure.Photos not available. ... (cont.)

Allenco windowsbalances have 3 stamped codes: 2430; B.S.I.; DJdimensions: 26" from the bottom of the plastic foot to the tip of the plastic guide. 2 widths the side with the stamps is 9/16" and side that's open is not quite 11/16" but it's also bent so I'm not really sure.the height is 5/8"I need ab ... (cont.)

I need new Balance rods. My current is marked 24 3 KO CALDWELL. Difficulty deciding on which one is best match.

I need 6 of these balances. The stamped code on the balances are 2420Q, I am not sure of the brand of the windows but they do not tilt.. The upper shoe is not winged. Please let me know the right part to order and if it is in stock Thanks Hareesh

Please advise if you have the balance spring for a P.G.T window and rough idea of cost. Thank you