Viewing all customer Discussions for:

26-244 Tilt Window Latch, Right Hand

Hello, I have several Patriot Series 2000 window latches which have broken over the years. I tried to find a replacement part at both Home Depot and Lowe's, but they don't seem to sell these. Could you help me find 5 of these? Attached are pictures of the working latches. Another item I am ... (cont.)

The top plate is rectangular, but the bottom side that fits into the window is rounded on the inserting end. There are no screws to hold in place - the part just slides into the window from the side.

I have Patriot windows that need new pivot shoes and from your list it seems tobe the 15-121 shoes but I send pictures so you can let me know if I am right before I place a order and also the tilt release left side so I CAN TILT THE WINDOW IN.. Thanks for YOUR Help Frank

I need 12 of each part The picture of the broken end has a hook at the end that is missing I am hoping you can help it has the number L1658 on one side and R1658 on the other The straight part has the number 265 A stamped on it The white slide has the number 092 by the end and the letter P i ... (cont.)

Hi, Farley is Chapt 11 in Canada at moment and not offering parts. I attached photos. I need the pivot bar, balancer shoe, and sash tilt locks. Do you have any suggestions? I saw a pivot bar that might need to be modified, it may work. You probably have the tilt locks. If you don't have the ... (cont.)

The only marking on the back of this latch is J .375

This is 3/4" 25/8" is the size.

Hi, I broke the Right side tab that holds the top part of my window in place. It is a tilt sash window. It has a capital R over a 15 on the back an either a 60 or a 09 on a small tab near the outside. it is about 13/16" deep with a 3/16 slot to slip into the frame at the top. The unit measures ... (cont.)

I'm looking for replacement parts for my Alcoa windows that were installed when the home was built new around 1996. The windows are white and the spiral balances have a white casing. I've attached a couple of pictures, but I'm not sure what series/model windows I have. The window that needs spiral ... (cont.)

I need to find the matching tilted window latch for this broken one. As I see the latch, the part has "Pat. #5,139,291", "M" and "75". How can I buy it and and possibly a retailer who has them?

I need a new tilt latch for a vinyl window, unknown manufacturer. Measures approx. 2 3/8" x 5/8"

Hi, I cannot find the photo'd latch on your site. I can find similar, but none with the actual bottom(with a small square window showing the spring). It's 2 5/8inches long, 11/16 wide and 7/16 high. Do you stock?

I need the trigger lock replacement part (LH when looking from the inside of the window) for my Prism window. Can you assist? Thanks for the help. -Tator

The window/Latch is from a builder grade window from about 1994 or 1995. The dimensions on top are 2 5/8" X 3/4". My apologies for the pictures. I can get better ones if need be. Thanks, Greg

I have a 41 x 28 " double pane Alcoa tilt window , was installed new in 1996. Both tilt latches need replaced. color is white. thanks

Can you identify this window balance hardware? (Images Attached) I believe that it is block and tackle style but I don't see a match on your website. Could you possibly recommend a substitute part if you don't carry it? I am also looking for a replacement latch. (Images Attached) Thank you, ... (cont.)

Hello, I just ordered part number 26-243 and 26-244. the measurements are exact and I believe these are the exact latches I need. My question is do they come with the internal spring or do I need to purchase them separate. I separate, what is the part number and can you ship them with my current ord ... (cont.)

I would like to order replacement part for my Simonton Windows. I have some numbers on it: 3619895/02 29 5000 56 7500 PPOHWI 50301LEAR 10/27/03 B24WH. I need to repair three windows. I need for each window: (1) Coil Balances; (2) Pivot shoe; (3) Pivot bar; (4) Tilt latch; (5) Lance Spring cover. T ... (cont.)

I am looking at your Tilt Window Latch, Right Hand, Product Code 26-244. I have the identical latch, except that it is only 2-3/8" in overall length. Would you have Product Code 26-244 in a 2-3/8" long format? If so, what would the product code be, and price? Thanks, David

i have interstate windows and need some replacement tilt in latches. the ones you have, 26-243 left and 26-244 look like the exact ones i need, my windows were installed i year 2000. company is trying to get me replacements as they changed the design of the latches.