Viewing all customer Discussions for:

26-244 Tilt Window Latch, Right Hand

Hello, I have Nusash windows from 15-18 years ago. They were installed from a previous owner, so I don't much info on them. The tilt latch mechanism broke and I am trying to match up a replacement. This if for the left side of a double hung vinyl window. Its about 7/16" in width, 2 5/8" in length an ... (cont.)

Was changing my window screens when one of my window tilt latches broke off. I can't find the same part and was wondering if this part is even in production anymore. Closest measurements I could find were the 26-243 and was also wondering if this is a good replacement

I'm looking for 5 pairs of tilt sash locks. Thanks!!

HI there, I am trying to replace some of the latch for my vinyl windows but these windows were installed by the previous owner. I am trying to see if you carry this item. The size is 2.5/8"L x 5/8"W x 3/8"H. Please see photo attached. thanks Simon

I want help to replace these latches on my pella windows Thanks

Approx size is 2 5/8 by5/8

Can you help me identify a replacement for these window tilt latches? Many of these are falling apart, and no longer secure the window in place. These are single hung vinyl windows probably 25 years old. Thanks!!

Facing the window from inside the house, the right tilt latch is broken. I would like to order one, or the pair. Measures 2 and 5/8" long x 5/8" wide. See pictures.

Howdy,I need the replacement parts above for what I believe are Simonton Reflection 5500 windows (not sure though). I need (6) of the plastic lower parts (IMG_6168 through IMG-6171) that receive the cam, and two sets of the top release latches (left and right) as pictured in IMG_6172. Please cont ... (cont.)

Dim are: 2 5/8" long Barely under 3/4" wide on the top, bottom width that slides into window 9/16" Total thickness 7/16" Simonton window about 18-20 years old.

These both came off a rental house window, the part that keeps the sash locked in a vertical position is 4" tall, 1" wide and 7/16" deep from front to back. Naturally, they come in a right and left hand both.The part with the springs in it that the window mounts in are also needed, I need 2 left and ... (cont.)

Hello, I need to replace some broken tilt latches on my Simonton windows. I believe their dimensions are 2-5/8 x 11/16 x 3/8. The window serial number is 2467616/02 Thanks.

Looking for this tilt latch for a Loewen upper sash. The tab broke off.

I need to replace my tilt out window latches.

It does not fit 26-393, 26-393B, 26-243 and 26-244...Please help!!

Hello, I do not know the maker of the window. It is a white vinyl. 3 of the 4 photos show the latch type still intact in another window. The 4th shows the empty spot where the thumb tab broke and is gone. I need both a left and right. Thank you for your assistance.

During my attempt to clean the windows I tilted them out to far and all of the plastic components broke. I have all the the metal rollers. They are not needed. I'm going to attempt to send another email to you to show more pic's, hopefully to help you identify the parts I need. Thank you. Jeff If ... (cont.)

Hi I have Alcoa windows. The right tilt latch is in need of replacement. Measurements: 2 5/8" long 7/16" tall 11/16" wide Thank you for the help!

Hi, We just bought a house and the replacement windows need some love with replacement parts. We can't make out the make/model of the windows, but attached is the sticker we found, and photos of the tilt latch and pivot shoe.

No numbers found. No screws