Viewing all customer Discussions for:

26-244 Tilt Window Latch, Right Hand

Tilt latches for Alcoa windows installed 1996. No top screws

Need help with replacing this right side window latch and the left side too. Please and thank you

I need both right and left coil balances for a set of 4 identical windows. Window tag included. I also need a single tilt latch. Any help would be greatly appreciated. I am quite capable of replacing just need the correct parts.

I Purchased alliance windows in 2006. The right tilt latch broke. I ordered the wrong parts I need to get replacements.

The tabs on the left and right latches have broken off. I think your part number is 26-243 for the left and 26-244 are the correct replacement parts. Also, would the replacement part number 26-471 for a pair of latches be correct?

Latch length is 2 5/8" Width is 5/8" Flipping it over, appears to have 2 pins that hold itself in the window. The whole latch slips in

Need help finding these or a suitable replacement Caliper says 2 21/32 long 11/16 wide 7/16 deep

Pat. #5.139.291 15 mm x 66 mm. X 10 mm inside dim. 2 locks 7 B and 10 b

Looking to buy tilt latches, balance assembly, locks, and weather stripping for Simonton window. Picture contained window sticker. Thank you!

Hello, I need a replacement tilt window latch. I don't know the make of the window. It looks like your26-244, beige might be what I need. Is your item universal?Thank you,Ellen

Possible patent#5139291 .75 Bought slim top tilt latch #26-391. It is much thinner then mine. Will the thinner one work

Please help me identify which window tilt latch I need and let me know if you have it. The dimensions are 3" L x 5/8" W x 3/8"H These were some numbers that were on a sticker on the bottom of the window. H01058040002 EADHBSB1 CRDHW0329302600

Single Hung Window Latches, handles broken off by evicted tenant, no names or numbers visible windows.

I need 10 tilt window latches for Sun double pane tilt windows that were installed in my home in 1997.

Hi I am needing to identify which replacement tilt release would work best to match the design I uploaded. I can find similar items but the dimensions are not the same.

I'm looking to see if I can buy more of these clips. May house is 15 years old, and they are breaking more and more. any idea who build these windows so I can get replacements.

Weighed window and can i use the 140 quick tilt balancers to replace the dual spring balancers? Also need sash vent latches left and right believe they are 26-362, tilt latches land right believe they are truth hardware because of being rounded 46.20.32.002? And need 2 balancers for upper window 14. ... (cont.)

window latch but I don't have an Item or model number. long is 2 3/4 high 1/2

Attached you will find 2 items I am trying to find for windows. One item is the tabs used to hold the screen in place. They are so brittle I can not remove them without breaking them. The other item is the tabs used to tilt the window. Well it fell Apart as I removed it. Here a a couple pics ... (cont.)

Hello, I'm look for parts for Alliance Windows. The windows are approximately 20 - 21 years old. Have attached a photo of a label I found on the window. CAR# 116-104,Model Windgate / Belmont Single Hung, Rating H-R20 44x60. Some of the windows are 44x60 others are 18x60. The Window Tilt Latch has a ... (cont.)