Viewing all customer Discussions for:

15-002 Channel Balance Shoe, 1" Depth

the code on my channel balance is 27 5 HR the Metal part of channel is 28" and looks like it uses guides 19-002 & 15-002

I pulled 6 channel balances out of 3 windows. Four of them are numbered 2240Z and two are numbered 2240. The 2240Z's appear to be newer. The 2240 and 2240Z were mixed together in 2 windows so my best guess is that the 2240's are old and that the 2240Z's were used as replacements sometime in the p ... (cont.)

PGT SH4000 window. Channel balance is 37" x 1/2" wide. Stamped with 36 4 AU CMC 2. Top looks like 19-005 and shoe looks like 15-002. Can't tell if shoe is 1" or 1 1/8". Looks more like 1 1/16".

I need a replacement non-tilt 28" long 1/2" channel balance. I can't seem to find a match in your series of channel balances. This balance has wings on the top plastic piece, but NOT on the bottom plastic piece. Please see the attached images. Can you help me find the right part? It looks lik ... (cont.)

Hi, I think I found the part I need but the stamped numbers on my channel balance do not match what is listed. I'm look at this 28" Series 351 Channel Balance with the 19-002 top and 15-002 shoe but the stamp is 27c and does not match the options listed for that series Thanks, Richard ... (cont.)

Hello I am trying to purchase a few window channel balances, but not sure which part will work for my windows. I will need two sizes, 16" and 29". I attached photos of the top and shoe attachment. Thank you for your help. There are no names or markings on the balances. However there is a ink numb ... (cont.)

I can't find this exact one on your website can you help me find it or find one that will work with my windows. it is 1/2 inch by 30 in length. the only writing on it is 29 3 CO Caldwell.

I need to replace the window balances on 3 windows. They are all identical. Using your website I think I have determined that I need 6 balances for non-tilt windows with a 1/2 channel. Channel balance top 19-005 Channel balance shoe 15-002 28 inches in length I have attached some pictures o ... (cont.)

metal balance end to end 26 1/4 in 19-005 top / 15-002 shoe sash weight 24 lbs.. I did not see a balance that matched, do you thanks dan

I have two balances that need replacing. They are stamped "233". They are 1/2" chanel and 24" long After looking at your premade balances It looks like they have a 19-002 top and either a 15-001 or 15-002 shoe. I can't seem to see any difference between the two. My shoe looks similar but just ... (cont.)

I need to replace window balance and I need help in identifying. Pictures Attached. The windows were manufactured circa 2002. Only markings on the window itself is the name Fisher on the window locks. The metal has hemmed edges. The balance is marked 27 3 CV CMC 1. The lenght is 28". ... (cont.)

Attached are 2 pics of replacement channel balances I need, not sure of the exact top and bottom shoe. Looks like 19-002 and 15-001 or 002. The number on bottom of balance is stamped 1620. 17in.

I think my window channel balance is 61 series. They are 29" long by 5/8 " with laminated edges. I will send pictures. The stamp says 28-2 . Thanks

Which balance do I need? 28" 2730 top 19-005 and shoe is a 15-002.

I have to replace the following balances, which are stamped - 15S16 16" long channel 19S21 20" long channel Both are fitted with 19-002 top and 19-002 bottom However, there is no reference to the 4 digit numbers noted on your site. Please advise.

Hi- I have 10 windows which need balances replaced. I can't see the difference between the 15-001 shoes & the 15-002 shoes. Our balances are either # 351 or 390? 22 inches from end of metal to end of metal. I also want to replace the clips on the metal sash, some are broken, buy?? How the he ... (cont.)

I think I need Series 351 with 19-002 top and 15-002 btm My windows are KINKO window mfg in Jacksonville Fl in 1990. Thank you in advance for your help The stamp on the spine is 28 3 and Channel is 29 Inches

I need to replace a 29" balance stamped "2840 AA". I have found part S390-29 option 2840. It comes preassembled with top 19-002 and shoe 15-001. My shoe is exactly 1" deep while the 15-001 is 1 1/8". You sell 15-002 which shows as 1" deep. Can I get a 29" balance like S390-29, but with sh ... (cont.)

Howdy, am (like everyone else) trying to determine which replacement balance I need. Length of the metal bar is 28". Embossed are the letters DB 102 2730 (perpendicular to the first two lines). The top appears to be a 19-005 - the measurements match, though there's an extra rib not shown ... (cont.)

I need the following Block and Tackle balances replaced I figured the first number is the size and from what I have read the second number and letter combo seem to be the tension for the weights. I have attached a picture below. 4 - 29 3 BL 2 - 29 1 CL 2 - 27 2 DK 2 - 16 1 AL 4 - 10 1 AL P ... (cont.)