Viewing all customer Discussions for:

58-114 25ft Kerf Mount Bubble Seal, 3/8"

Hinge says "truth". Foam filled bulb is 3/8" about.

I'm trying to locate the proper part for Milgard window. Total "height" is 13/32". Width of bubble is 13/64".

It 1/8 inches for the insert and 1/8 for the other

Above are some pictures of the weather stripping of an old Pella sliding glass door. On the door is the following: CGT Tempered 16 CFR 1201 II SGCC 1803(OR 1805) 5/32U

Truth casement crank. I don't know the window brand. It is vinyl over aluminum window

Hello, looking for some angled base, bubble seal, and leaf weatherstripping. Thanks for your help Mike

Hi I'm hoping you can help. I have a customer with Loewen (Canadian made) windows all impact rated (beach home) The are channel balance type with 1/2" w x 3/8" deep (hard to measure) 20 - 25" long (see stamp) balances (stamp is 26) 36 - balances 24" (24" stamp) 12 balances 27" (stamp is 28) The piv ... (cont.)

This weatherstripping slides into an aluminum track used as door weatherstripping

This is the bottom seal on my aluminum widows (see photos). The windows were installed when the home was built in 2001. appears to be a 1/4 bulb and approx 1/8 inch (3mm) kerf. looking for replacement seals.

Hi, we are looking for the rubber or vinyl seal shown in these pictures. Do you have this part? Window slot is about 3/32", bulb is 1/4" OD, looks like barbed? but real worn out, maybe kerf?, for old aluminum tilt balance windows. The tilt balances and latches (26-295) I purchased on previous orde ... (cont.)

Sections of these came off my Bella sliding doors. They were installed about 15 years ago.

I am looking for replacement bottom door seals as noted in the photos. One seal is a type of wiper seal on the bottom of the door and the other seal is a bulb seal (~1/2")bulb diameter. Third photo shows the door serial number Thanks. Mike

The bottom strip on my door wall came out. Looking to replace it

This pile SNAPS into a channel on the casement window, it is NOT adhesive or slide in. Do you have a product that can work? Thanks

Trying to find this particular style kerf.

Hello, We have Pella insert windows that need the seal replaced. What product do we need. I believe we have 17 windows between 24 and 36 inches wide. Thank you,

I'm looking to replace my window weatherstrips. I'm wondering for you have these window strips/seals. I've included the photo and a measuring stick next to it. Lower window pictures labeled 1 to 4 For the lower window strip. The strip was not attached to the lower window instead it was at the botto ... (cont.)

Windows are original construction pre 1995. I can not remove the weather stripping for identification WO removing the sash which does not appear to use tilt latches.I can not figure out how to get the sash to move either L or R. In order to remove it. Can u help? Thanks, g

Hi. 2 different items im hoping for help identifying: Checkrail in pic 9184 and weatherstripping on the bottom of lower sash for double hung.

Hi All, Here's a couple of pics of window glazing beads for which I'm looking. The first has a fold over element on top which has fallen off. I'll appreciate your guidance. Best, Note the 3 text line on the one should read 5/16" and is approximate.