Viewing all customer Discussions for:

58-114 25ft Kerf Mount Bubble Seal, 3/8"

What do I need to purchase to replace this?

I am looking for kerf weatherstripping to fit casement windows. They were manufactured by Republic aprox. 25 yrs ago.The height is 3/8"-7/16". The width at the top is about 3/8". Attached are photos that might help. Thank you.

Looking for replacement weather-strip as pictured. Please advise of availability.

im looking for this seal and can't find it,

I have 7 casement windows that are around 25 years old and the plastic weather stripping is breaking in nearly all of them. Attached is an end picture of the weather stripping with dimensions added. Do you have something I can buy that will fit where these did? George

The one I got from you is the correct diameter but the kerf piece isn't wide or tall enough. The part I received was 58-114

We need 5ea, 9' lengths of this black kerf in pile (with fabric) style weatherstripping. It is installed on the edge and bottom of the doors. There is aprox 100 exterior sliding doors in this home that will need to be completely redone soon but we want to make sure what you send us will work for the ... (cont.)

I am unable to identify the glass door manufacturer.

Need to purchase weather stripping Regards, Bob

Looking for the names of these weather strips. I know the big round one is called bubble strip. Im more focused on the smaller D shaped pieces and the flatter channel piece that is a little bit hard to see in this picture.

This is a Vetter patio sliding door. This is the small weatherstrip that goes on the interior portion of the frame, and when the door is closed it provides the seal.

I need weatherstripping for my 23-28 year old home with MW double hung wood windows. Can you please let me know what weatherstripping choices I have? Thank you!

I need weather seal for Hurd double hung windows. I believe it is a Kerf bubble, but I don't know which one. Windows are from 1998

Which bubble mount would you recommend? Also do the foam filled ones hold a better seal? This is for a basement window tilt in.

I need to replace the weather strip on my Kolbe sliding patio door. The base extension is 1/4" and the bulb appears to be 1/4" wide by 3/8" high.

This looks like bulb weather stripping. It has a 3/16 for the slot insert and 5/16 bulb. The stripping needs replacement. I do not know the window manufacturer.

Trying to locate a seal for a 1998 Pella Hinged patio door. The 3/8"(58-114) looks to be undersized. The attached pictures show the size I need is closer to 1/2" O/D. The full height looks to be 3/4".

need weather stripping for doors. 20 years old and leaking. Dimensions of weather stripping: Diameter of tube is 1/2" length of part that fits into the kerf is 5/16" total length from top of tubing to end of part that goes into kerf is 5/8"

35 year old windows. I can't find these specific seals please help.

Hello - we have 22 year old General Aluminum windows - the rubber seal on the bottom of the windows is flat (used to be round). Can you please tell me if you carry them - and what the part number is?