Viewing all customer Discussions for:

82-107 Sliding Door Latch Lever Kit

I need a latch lever kit for a dual point lock handle for a jeldwen sliding patio door. Would it be 82-107? See pictures

need this dual point mortise lock and interior hand with thumb latch ( thumb latch is broken off in photo) in white. got'em? :)

Tenant broke latch lever used to lock JeldWen sliding door. I don't think the button that stops you from being able to put the lock into the locked position without the door being closed against the keeper was ever working properly since I started property managing this house. Thinking we need a new ... (cont.)

Tried to unlock my door and lock was loose and fell off when I went to unlock. I am assuming I would need to replace the whole locking contraption. Has initials JW

Trying to find the right piece to replace the lever to lock it. Or just replace the thing.

Is there an exact replacement for this

My lever to lock the door from the inside has broken. I'm pretty sure all I need is the gasket that holds the lever in place.

I have been searching for a long time for the turn handle for this lock now I have three broken locks please help me find a replacement. This is as close as I got the last time I searched. If I can just purchase a turn mechanism which broke off , great! If not a replacement please ... (cont.)

Inside lever broke off, can just the locking part be replaceed?

I believe I require your #82-218 mortise lock. However, I can't seem to locate the correct latch. Please see the attached pictures Thank you Dennis j Sunday

I have an 8 yr. old Jenweld sliding glass patio door, from the inside it opens from right to left. The inside latch lever is broke as is the cover plate for the latches. Pat. # 5.820.170 # 6.264.252 Can you tell me if you have what I need ?

Would like to order a new thumb piece aswell as a keyed lock. If need be, a whole new handle .So part number would be greatly appreciated Thanks in advance

Mortise lock: patent number 6.264.252 handle is patent number Amesbury Hardware: D466787 cover plate for side of sliding door is inset and has CS marked on it. I have photos if needed . I live in Lakewood, CO . suburb of Denver . door has a heavy metal frame that the mortise locking component a ... (cont.)

Thumb turn that's held in with a palnut Phillips 870 series patio door PHP-07 A-L-I validater It's just the thumb turn & Palnut that needs replacement

We need a latch lever for a patio door. Lock works with a screwdriver. Door is1 3/4" thick, screws are 3 15/16" centers The latch is about 1 1/4" from the screw. It is not centered between screws. The key shaft from the outside of the door sticks through the door at about 7/8" leaving a gap of abou ... (cont.)

The inside lock fell off the door. A piece inside of it broke off See pictures. Descrip.6068 72?x80? FCRO Wh VS/I/TAA/DS/H white right open dbl str. TmprA 9050-1000-00 106-0100-000 Thank you.

Missing the locking lever from 1 of my 2 Tempest patio doors. Pictures showing the complete hardware and the empty hole.

4 1/4 inch

Label says rainbow 88267. Latch and insides are all broke new a whole new assembly

I have a sliding door handle where the latch that locks it broke. I don't know the brand name of the sliding door. Can you identify from the pictures what part I should order?