Viewing all customer Discussions for:

39-165K Jalousie Window Operator Kit

I need a new crank for my JAL-O-VENT window that was originally produced by IECO industries DesPlaines IL.

Need a replacement window crack

I am trying to find this crank addy by Stanley but every one arcs the other way. Does it matter? It is a R/H crank

Hi I have 3 screen storm glass door with right side door operator made by Yale Any heavy duty replacement suggestions ? Thank you

Hello looking for the lever part in the photos. It is marked with Louv Air under it. Also the window frames also have Louv Air stamped on them

This jalousie crank is/was actuated with a pull chain. There are three gear cogs, one is attached to the pawl arm that in turn raises:lowers the rail holding the glass louvers. Broken tooth, so no workie. Not sure what my repair part options are going to be?(Edit: "Pawl arm" not panel arm.) ... (cont.)

The jalousie window crank is broken and I'm not able to open or close the window. Need a new window crank to open or close it. These are additional photos of the

I have tried replacing this with "reverisable" cranks to no avail. This is for a double jalousie window with the cranks in the middle. It is on the left side of the right side window and there is a crank next to it (1"apart) for the left window.

I need to replace the window crank. The handle slips, but the crank works.

Thank you for your email. I've attached several pictures of the jalousie crank. The before and after pictures of the assembly with and without the handle. I've also included pictures of the universal T crank window handle that I bought to replace the broken one . By looking at the pictures would you ... (cont.)

I am looking for a handle and screw. Thanks

jealousies window crack with a small T handle only

Do you carry this type of opener. It's probably very old!Thanks,John

I need to replace the crank since, as you can see, the part where the screws attach to the aluminum frame snapped off. I'm guessing I will need to send a photo of a similar window so you are better able to determine which part I need. Thank you for your help.

Hi there .... We're trying to find some replacement operators for our jalouise windows... The house is in the Caribbean so trying to find the right part.....headed there in October so no rush.. Do any of your operators work for this? Sincere thanks, Tom

Crank and screen

We have a customer looking to replace their broken window operators preferably with T handle type operators. The current hardware is dark bronze. See pics. Thank you for your help.

Could be PLPCI jaloussie window operator? For door and window

The handle broke away from the frame. It is really old and wor, so I cannot open and close the window.

Is there a universal operator that will work if I cannot find the original make/model? I believe the windows were originally installed in a hospital that was demolished/renovated in Iowa in the early 1970s. They were then installed in our cottage in northern Canada.