Viewing all customer Discussions for:

39-165K Jalousie Window Operator Kit

I don't see any markings to indicate a brand name.

Good day, my house built 1957 has aluminum awning Jalucion ,crank windows, right side crank operator Need 4 window operators Need 10 crank handles Need 6 hook locksNeed 6 hook locks studs baseWindow are stamped Trade Mark Auto lokPlease let me which part are the replacement on your website?Th ... (cont.)

Attached are photos of the one that needs replacing. It got all corroded and the top part where 2 of the screws go broke off. The main part is about 5 1/4 inches. (If that part was still on). The longer arm is about 4 1/4 Current long arm is 4 1/2. How important is it that the arm length match ... (cont.)

I want to substitute this one but I afraid that I don't know it fit to my old one or not ,

Looking to find replacement components for window cranks and or mechanisms for a house built in 1954. The only identifier is a patent number: 2732726 on the component labeled Side crank, for discussion. The patent number is viewable on the USPTO website. The windows are approximately 35" wide and r ... (cont.)

Hello Swisco, The operator link is 3 5/8" c-c and has an 1/8" offset along the length of the link. Thanks for your help. Joe

I need to replace the operator. Please let me know which to order. Thank you, Ella

Hello Swisco, Please advise as to which of your jalousie operators replaces the operator in the attached photo. Thank you, Regards

Hello, I need a replacement mechanism and handle for a small bathroom window. I think you can see the size and style. Please let me know what parts numbers to order. Thank you!Marie

They attach to window frame to an aluminum flat circular sprocket and have a 3/8" plug insert that mates with window handle crank like a worm gear set up then secured as a unit with screws to window frame see pics and drawings with measurements thank you please advise have a great day ... (cont.)

Hello - house built in 1959, original windows. Most don't close all the way, small gaps at the bottom and along sides. Trying to replace parts and hoping to get those to close all the way. Couldn't find a model #. Love the windows. Some cranks are hard, not sure if that means I should replace? I put ... (cont.)

Hi. I have a dozen Pan Am 3'x4' 3 pane jealousy windows in my house. Looking for parts for these windows. I need a new crank assembly and replacement lever arms. Let me know if you can help. Thank you.

I can't find this operator, can you help me.

Looking for a replacement.

I need four operators.

i have a jalousie window with a broken crank. The crank just spins, it doesn't catch. I see that i can purchase just a replacement handle and not the whole operator, but the existing handle has no screws. Any ideas on how to remove it?

Crank from behind the bar broke have a cauter pin but it's too loose and it doesn't allow the window to open but a few inches now do you have some thing longer it is a 5 inch here's a photo I mean the handle I'd like it lower so that I don't have to climb stairs to reach the crank twist thank you t ... (cont.)

What are the mounting hole dimensions for the 39-165K (centerline to centerline)?

I need to replace this jalousie window crank out on my bathroom window. Would you have something that I could use even if it is not exact? Thank you!

I'm trying to replace my jalousie operator. I'm sending a picture of mine. You carry part 39?346 and 39-054. Mine looks like the 05 for part but wanted to know if either one can work for mine? I also see that you have clips part number 39?213. They look like it's a darker shade not quite aluminum? D ... (cont.)