Viewing all customer Discussions for:

58-198 Grey Pile Weatherstrip, 3/16" x 7/16"

Im looking for .350 pile height with .187 back in black. Anyone know where I can find this?

I need weatherstripping for the front door on our store in Fritch, TX. Its 5/8" width 1/4" deep. Solid aluminum (bronze)

This is the picture of the weather stripping needed. Thank you!

Between 2 glass doors, it?s like a nylon wool pile. 3/16" base and slightly over 1/4" pile.

Weatherstripping for bottom of screen door

I am looking to replace the weather stripping for my patio door. The sliding glass door is a PlyGem brand, and they recommended I reach out to you for the replacement part. As I hope the pics show, this stripping slides into the screen door - I am not sure which size item I should get, so I am hopin ... (cont.)

I have a 1996 Grand Banks trawler with sliding windows, need to replace all window wool pile, which slides into the bottom of the windows in an aluminum track. I didn't take a picture of it, at first the twenty year old fuzz came out with out the plastic bottom. Then I was able to get a piece of the ... (cont.)

Above is a picture of my pile weatherst-rip for my plexidor pet door which I would like to replace with a taller weatherstrip. Do you think that the ones that you have 3/16 by 7/16 58-198 fit for my doggie door. The top 3/16 have to be able to slide between the pane of the doggie door. I have a d ... (cont.)

I am looking for weather stripping for an Old Castle brand double doors. the crease where it fits is 3/16" wide and the brush part sticks out 1/2". do you have a part number for this

Stripping from bottom and top of vinyl tech glass doors. Create new post

What is the replacement weatherstrip for 79-030? I have what looks like an older version and it's missing

Hi, I need some help! Two things. one is I'm concerned about my measurements on the weather strip because the sun and weather has shrunk the materials ... so here's what I get 3/16 x 3/8. see photos. My next concern is installation. I don't see a way to feed the new striping in the cannels.(see phot ... (cont.)

Need this material asap - roughly 10-20 ft

Hi! I'm hoping you can help me find the correct replacement weatherstripping for my tilt-in windows. I've included some pics to help. The space I measured for the stripping to slide in is about 4/32 with a little bit of space on either side, so I'm guesstimating maybe 5 to 6/32 tops. The pile that's ... (cont.)

WE MEASURE OURS 3/8" X 1/8 GREY WOOL STRIPPING TO REPLACE ON OUR HURD SLIDER SCREEN DOORS - DO YOU HAVE THAT SIZE? IF NOT WILL YOUR 3/16 X 5/16 WORK? THANK YOU

I purchased from you part number 58-050 which is a Gray Wool Pile 7/16 x 7/16 weather strip. The wool pile is perfect, but the plastice backing is to wide and when researching your site I could not find something that I felt would work. Can you help please? Tks Leroy

I need the part number for weatherstrip 3/16 base and 1/2" thick pile. Thanks, Steve

Balance is 26 in weather strip is 31.5.

I recently pulled some white wool pile weatherstripping off a Patriot 1800 series window and need replacement. Tried to measure the base (measured 3/16) and height (from base to height of wool, seems 7/16). None of your options match this, and the plastic base is not flat but is concave with two " ... (cont.)

I need your help on ID Weather striping for side of my window. I have including pics