Viewing all customer Discussions for:

15-005 Winged Channel Balance Shoe, 1" Depth

Hello Marking on the channel: 29 3 AN Caldwell, 30" long, 1/2" wide

Simonton aluminum window. 9016031/03 model window size 53.125"x63" channel balancer is 3/8"wide top of metal to bottom of metal is 30" top of plastic attached to metal to bottom of plastic attached to metal is 31"

I have an order with you currently. This window is no not opening correctly. i cant find the cross reference #29c w, on your web site. Can you help me? This channel is 30 inches and is the 1/2" channel. Thanks for your help. Laurence

Hi, Can you identify the part with the description (0'/05) Unique 25-D-40 or with the attached picture? Thanks, Pablo

Please confirm channel balance parts for 30 inch long by 1/2 inch wide excluding plastic ends. The part has stamp 29-9 AA CMC 11. This is for Norandex window. Need for the right side. Also need a white sash which I believe is part 18-161 5/8 also for the right side of window . Note the left channel ... (cont.)

Hi, I'm looking for help ordering replacement window balances for 6 windows. The stamp on the metal says 26 5 ew cmc 10. These are non-tilt windows.

Looking for two replacement springs lot a kinco window. See attached pictures

broken. :(

The sash is large measuring 35" wide by 31" high by 7/16" deep. Manufacturers label says Florida Extruded Products Inc. Model name is Milestone Single hung Series 1000. Needed parts are left and right balance assemblies. They are spring/block and tackle type. The spring and block and tackle a ... (cont.)

I cannot seem to find the correct replacement for a nu-air balance

I want to replace a broken sash balance and am unsure as to which Series I need. It appears that the top is a #19-005 but I'm not sure of the bottom. Hopefully you can identify from the attached images. the shape is similar to #15-004 or 15-005. The sash balance is 33" in length and marked "3250" ... (cont.)

My windows will not go up at all, i watched your video and took it out. Both balances are broken. Found little pins broken and had fallen off in the track. Stamped on the metal rail is-3450-43. I actuall have 4 windows that are doing the same thing. I would like to get a set for one to make sure ... (cont.)

Stamp is 33 5 HQ Caldwell I dont know how heavy the window is. Thank you, Darryl

Hi, The Channel Balance popped out of one side of my Milgard window. I'm pretty sure I need an S380-30 30" Series Channel Balance but am having difficulty with the Stamp option. There aren't many markings on the balance. Attached are photos. Any help would be much appreciated. Thanks, Irene ... (cont.)

26 5 CW CMC 10

I sent a note yesterday regarding my need for a ballast for a Lawson window. I attached pictures and I am afraid the size might have been too big since after I hit the submit button the screen just went blank, no confirmation of sent. Can you let me know if you got my original request? Otherwis ... (cont.)

I have a single pane vertical sliding window with broken balance. The window is about 22 lbs (weighed, not estimated), and 28" tall. The channel itself (the metal part) is 26" long. The window was made by Philips, as noted on the lock. From your catalog, I see that these could be either series 3 ... (cont.)

Information written on side of window balance: 33 3 CALDWELL JM It measures 33 3/4 inches in length It measures 1/2 inch in depth

Need help on the correct series to replace my Milgard Channel Balance, the code stamped on the original part is 32 5 CW CMC 8 The channel shoe measures 1 3/32" in height, the metal rail is 33" long and 1/2" width.

I need a 2 of these do the ends come on them or not or do I have to order separate I measure 30in with the plastic tips but 29in just metal I also need the little prices on inside of of sides of window can u help