Viewing all customer Discussions for:

32-001 Rear Drawer Track Socket

Plastic end cap for slide. Not exactually like but very close. Drawer made in the 1950's

Can you please help with these two parts? We believe the first part is 32-312 but are having issues with the 2nd item. This part supports the drawer in the middle. The drawer slides into the square. The bottom part is broken where the screw is. It's probably an additional 1/2". It's not a bumper. ... (cont.)

The cabinet is 30+ years old and there is one track on the bottom and middle for the drawer. The plastic back stop for the guide broke. None of the standard replacement parts work. They are too small. There is a wheel attached to the back of the drawer that fits into the 22" guide. ... (cont.)

I have a kitchen island with a drawer. The images hold the wooden drawer slide in the cabinet. There are two of these on each side of island that hold slide in place.

Looking for a replacement

I found a picture during a search on google it was attached to you wedsite, Hoping you have this part , I attached 2 photos of it is missing the socket part of it were the rail goes into it.

The piece I'm looking for sits in the back of the draw and holds the middle rail in place. It broke and I need to find a replacement. Please help.

Hi, just spoke with you concerning the above subject. The broken socket, which I've attached at your suggestion is 1 1/8" (an inch and and eighth.) I could use two (2) if u have. Measurement includes width and depth. I already recd order 1139821, but it is incorrect.

Help! My kitchen cabinets and hardware are really old, but I don't want to have to build new cabinets, get new drawer slides, etc., right now. I just need to repair them for now. I can't find these anywhere. The are the rear mounts for a 'runner', which is a piece of wood that runs from front to ... (cont.)

center guide socket, inside square measures 3/4" by 3/4" and depth is 13/16" what can you find? I see a rear mount fixed socket part #32-146 that may work if I trim the depth Was hoping to find something like #32-001 that has a 3/4" opening. Thanks Look forward to your reply Steve ... (cont.)

Drawer slide mounting socket bracket boot 1"x1" and and 1 and 1/4" deep

I need a bracket like this that is about 1inch deep. The pocket depth of this one is almost .75 inches I need one a little deeper.

Hello, I am looking for a replacement drawer socket that has broke. I have attached a few pictures of the socket and hopefully you will be able to help me with finding this part.

Overall length is 22 5/8". Overall width (top to bottom) is 1". Rail is for a glide roller mounted on the center of the drawer. The rear support would be your part, "Rear Drawer Track Socket Product Code: 32-001" (I think). thanks for the help!Robert

I need another one of these white peices.

I need to buy replacements of these. Any help?

I have a rear drawer socket that 2" x 2" that broke on the bottom. It similar to your 32-001. Do you have anything that size?

I'm looking for a drawer socket with an inside diameter of 15/16" deep. Any shorter and the drawer guide will not stay inserted. It looks just like the 32-001, only with a deeper I.D. Can you assist. Some prior questions have been placed forth regarding the same issues, and the 32-001 was provided. ... (cont.)

white plastic piece, interior dimension approx. 1" 'square' - piece has rounded corners and slight indentations at midpoints. Piece is used to support central drawer slide that shaped like a flattened 'U'

I need about 30 plastic 1 inch square sthat fit inside the 1 inch square tube. These are for commercial clothes racks.