Viewing all customer Discussions for:

32-002 Rear Drawer Track Socket

Pls see the attached photos and let me know if your part number 32-002 would be the correct fit / my orginal order that I returned was the wrong size. I could not find any kind of part number stamp on the socket either. Based on Google Lens it looks like it might be a Part # listed as 995PSR.. U ... (cont.)

The drawer rail bracket at the back of a long narrow drawer in the bathroom vanity broke where you screw it in. The rail is a single center mount vertical rail. The part says US Patent No. 3090662. I purchased a part from another company but it is about 1/8" smaller. The only part I found on your we ... (cont.)

Looking for the plastic clip that gets stapled onto the front inside of a cabinet, for sliding drawers. It holds the rail onto the front inside of cabinet. My drawers HANG from the track, rather than sitting on top of the track. For reference, here are links for other parts I'm currently using in th ... (cont.)

Is a something like this available?

The plastic pc, part of the oblong circle should be enclosed, it broke off... thanks

The white plastic part has no markings. Six screw holes. The almost square part is 4.3 cm x 4.6 cm. The rectangular slot is about 1.5 cm x 2.3 cm.

I have the rails but the back socket is broken do you have something that will work? Thank you

Lescoa 9300 is enscribed on the stop locks Photos are of broken part and drawer slide that attaches to it

I have the above piece which just broke. I have never been able to find any kind of replacement. I would like to know if the best fit is the 32-080? Also would the 32-002 work? Once I get your reply I will know how to proceed to place an order. Thanks, Serena

I need 4 cabinet slider back brackets. Both sides have holes for screws that broken off in this photo.

This is from 1980

The roller on the front part broke and the ball bearings fell out. The part is 22" long but then bent into an L shape and screwed into the back of the cabinet. This part seems to also be the support for the drawer as well as the side slide.

I need to find a bracket as the old one is broken.. can you assist/

its a plastic bracket that mounts flush to the back center of the cabinet it has a protrusion that inserts into the slide on both sides of the protrusion are 2 holes for small nails and farther out are slots for screws the left side is a horizontal slot and the right side is a vertical slot bracket ... (cont.)

do you stock a back plate drawer guide for a round track

I have inherited 2 broken rear drawer sockets. I do not know the manufacturer, but it is certainly an older drawer guide. The inner dimension of the socket are 1/2" X 11/16" and a depth of around 1 1/2". These sockets slide into another bracket that mounts to the back wall, however, I believe I cou ... (cont.)

Would you be so kind as to see if this is available from your company or suggest an alternate? It is from a center glide drawer - this is the back plate from the cabinet, not the drawer. The cabinets are about 47 years old.

I need a replacement part for this drawer guide. Do you have a part like this photo attached. The width on that drawer guide is 2.25" and the height is 1.25". I thought that would help. House was built in 1982.

Hi, I am looking for some replacement Rear door track sockets. Mine appear similar to 32-002. The inside dimensions of my socket are 15/16" x 7/16". Would 32-002 work? Thanks

mounts to back wall of drawer ,,holds the slider rod.