Viewing all customer Discussions for:

90-323 Sash Lock and Keeper Set

We have several of these latches that have broken. There are two tabs that stick out when closed. The tabs go into a groove in the frame, but the window must slide past that part of the frame when the window opens, so nothing else can stick out of the back of the latch body. There is also a pin tha ... (cont.)

These windows were manufactured by a company called Milgard Window and Doors in 2009. I am looking for the replacement window latch as this one will not lock down. I also included a picture of the, what I think is the model number taken from the metal insert between the panes of glass. Thank you for ... (cont.)

The underside of the working hinge lock states "Made in New Zealand". There are no other identifying numbers or names. When you pull on the handle, one of the plates does not move to disengage from the stationary plate that is fixed to the frame.

do you carry parts for mercer industries windows - in particular - locks AEOLUS-800 SH H-LC35-48x60

Do you have this window hardware? This is a crank window that was purchased in 2006. Thanks Annette

I got your contact from JELD-WEN and looking for this latch if you can help. Regards

Please let me know if you have this part or a replacement.

On the locking mechanism, holes on center are 1 5/8" On the latch that fits inside a window channel, width is 1/2" total but has a lip that is 3/8".

Unscrewed this Sash Lock trying to remove it but it remains attached to window frame. I think the locking mechanism is still inserted into the keeper. When I push the handle, there is no resistance. I cannot open the window. How can I remove it?

Hey Swissco, trying to find this handle replacement all his other windows are Milgaard except this one doesn't have anything on the handles and the handles are different is there anything like this you can think of

Several of these are cracked or missing. On some windows, they are in 'locked' position and we cannot fully close them. Any tips/tricks on either replacement parts or just getting the windows to close would be helpful. Thanks!

Here are pictures of the latch lock for my sliding side to side windows.

White die cast lock weigh pull handle

Looking for a Milgard positive action lock for their style line in white, or something that is an exact replica

Window Master related parts

I was referred here from Jeld-Wen support. They have discontinued the Mag-Lock window lock. I've included two pictures of the broken lock and two pictures with measurements of an un-broken lock. I'm hoping you have a replacement. Thank you!

I need several Locks like this to replace on some tilt and non-tilt windows.

We need to order the attached replacement parts. Can you please help identify the parts? Thank you

I have sliding windows with Push Release Sash Lock and Keeper Set as you see in the pictures. These sets are 12 years old and a few of them have the locking part that extends out (IMG_1065 in the set of pictures I sent) break one of their 2 prongs. Unless I can change this part, I need to change the ... (cont.)

Looking for these latches