Viewing all customer Discussions for:

36-048 2-Bar Hinge Set, 10"

Need these hinges as show in the two pics

Looking for hardware for two different windows. Please reference the photos and the file names as I've labeled them "Window 1 and Window 2" replacement Window 1 has a 3329 on the bottom plate. thanks!

I think this is an Alenco casement part but am now sure. I need to replace this part on a window that has rusted and no longer is work. Need to replace rusted parts per pictures - need a source - do you have these for a Alenco PlyGem 26x60 Single Casement window

Hello, The composite black part has broken as well as a metal part (could not remove without removing window) it is attached to the hinge/crank hardware for our American craftsman window. I am pretty sure it is a series 7550 casement. The window opens right to left and the crank is in the left corne ... (cont.)

Hi, I have a few windows not closing properly. Attached are photos. It seems the windows are sagging slightly. Can you tell me what parts I need ? They are Marvin casements and the house was bulit in 1994. Windows are originals I believe

I need replacements for both right and left. Inside cover reads Biltbest Part 233 D.C.

Black piece

What part connects bottom of window to the slider?

before I start replacing the hinges with products from your company, I was hopeful you would guide me on how to adjust the crestline casement window. As you can see from the photo the bottom part of the window is not flush with the casement- I have included photos of the gap, hinges etc. I have a nu ... (cont.)

Looking for replacement Truth casement window operator hardware for Approx 2005 Marvin Windows. Existing operator is marked Truth 45241. Link arm is 4-3/8" overall length

The longest bar has the number 358-3, and the shortest (to left in photo) is 358-2I also need the part that mounts to the frame, because the pin that fits the 358-2 bar is missing.I am not sure, but I think there is a difference between the top and bottom frame component.I will check further then ne ... (cont.)

I need help finding hinges

I need both bottom (crank) and top (see image of broken part) for this window.

Good day, I have a bay window with a casement windows on either side, the right hand windows casement crank operator is a truth 40372 and is no longer operational, would like to know what part number I need, also this same window has a 10" track on the top of the window frame that holds the casement ... (cont.)

Hi there. I need to replace these parts on 4 windows in total. Please advise. As you can see on the picture the mechanisms are completely ripped off the original opening. I can send you more pictures if needed. All together I have 2 right hand windows and 2 left hand windows. Thank you! ... (cont.)

Hello, I am needing help finding the part that secures these top window corners. I believe they are milgard windows.

Hello, This is an older window and it's having trouble opening and closing. I think it's due to the part on the bottom being worn and weathered. What would I replace this part with?

THERE ARE 4EA WINDOWS, ALL OUTSWING, 2 EA LH, 2 EA RH. THEY ARE ABOUT 25 OR SO YEARS OLD,TRUST MECHANISM. OTHER THAN THE 20755 ON ONE ARM I DON'T SEE ANY OTHER MARKS. YOUR HELP IS APPRECIATED.

I have a Truth window in bathroom with left and right crank arms. Image4 reflects rusted lower arm. The crank arm also not functional as it turns without the window opening or closing. I attached images of right side window which show measurements of each part. Please let me know the replacement ... (cont.)

There is a nylon (?) shuttle with a brass pin, broken on another window. This looks like one on your website. There are numbers you can see.