Viewing all customer Discussions for:

36-048 2-Bar Hinge Set, 10"

Do you carry a replacement for the Hurd casement window hinge? On the arm there are two stampings - 9693P and A93L

Right hand side window crank replacement; original Truth part# 30744D

This slide bar is 7/16" thick and a spring loaded pin attaches the window to the slide. The slide moves vertically to allow window to tilt open. Building was built in the 1950's.

The track that the crank window slides on is broken and i need a replacement

I have two swing out window's that both have a broken black plastic piece & am in need of new parts. When you're looking at the house from the front both windows are on the "left side" if that makes a differense like the window crank did when I bough it from a different company. ... (cont.)

Need the piece of metal that I have circled and arrow is pointing too in my photo.

The window in question is probably about 20 years old. As I bought the house 3 years ago, I have no idea of actual date or the manufacturer. In observing the operator it cranks normally to the stop. Is it the weather stripping becoming old and stiff or a worn operator,the manufacture of this is Tr ... (cont.)

Looks like the plastic anti-friction worn such that the slide is no longer contained by the lip of the fixed part. Markings: Truth 307448 or 30744B on the 45 degree arm. 40631G is the number on the slide now missing the plastic anti-friction. Now I have right and left windows so I would imagine ... (cont.)

I need this operator and the crank mechanism. Can I order this on this site

I need two shoes for an Amsco vinyl casement window. C-LC25-36x72. The top and bottom black plastic shoe broke, they do not stay in the groove of the ss operator track. When opening the window, it falls out of the frame and the hinges just bend. The photos attached are of the window adjacent to the ... (cont.)

Picture show left side parts I need 2 set of left side and 1 set of the right Thanks

I have crestline windows that were installed in 2001. Truth is stamped on the hardware and they are dual arm however the ones i saw on the site do not connect to the bracket that is on the window. Please help if you can. thanks for your help.george

Looking for the replacement parts shown. Left and right sides

This is the left-hand window all parts are included on the opposite side for a right hand window I am missing the two parts that are circled as far as where I can identify from your site it is the stud bracket I saw one that looks the same but the mounting stud is facing down instead of up he's faci ... (cont.)

I am looking for replacement hinges for Marvin casement windows. Long bar that screws to sash is 7 5/8"L and the short arm from sash to jamb is 5 1/2"L

The first image shows a bracket that is snapped in place to a button (you can see the button in the second image that is part of a fixed channel that the casement window slides in. In the defective parts, the press-fit button has popped out and the attaching bracket is very rusted. I need both par ... (cont.)

I cannot find manufacturer information on the window. What is circled is what I need a replacement for. I do not think you guys are the one to know, but I thought of asking anyway. I am clueless about who to contact. Thank you for your time

This part came off of a right hinged casement window. My customer & I do not know the manufacture of the windows.

I need to ID these parts on an old vinyl window Rt and lft flanking casements top and bottom hinges, sash track and operators. Thank you, Peter

Looking for the replacement arm 7168-18 for RH window. Picture show on with and one missing