Viewing all customer Discussions for:

36-048 2-Bar Hinge Set, 10"

This part is from the bottom right corner of a casement window that is hinged on the right side when viewed from the exterior. The sash pivots on this piece and also allows the sash to be removed.

Our handyman thinks these are made by Weathershield, out of Medford, WIAs pictured, likely "Crank 1" and "Crank 3" are likely the same.Hopefully we can order these 3 window cranks from you guys!Thanks,Sheldon

Looking for this hinge for a Pella Casement window. The other arm I lost was 10 inches.

Please help

This is the first of 5 pairs of windows I am fixing and need to replace all the hardware for. I need your help to identify and order the same as existing. I will send pics of the other ones in the following post.

Need the piece that holds the sash onto the track....

Looking to replace some of this hardware. WeatherShield approximately 2003

I found the numbers 07900 atamped into the arm, windows are old wood casement windows, cant find a manufacturers name on parts or frame. Theres a plastic guide that slots into the track and is screwed into the bottom of the actual window is whats broken. Hope you guys can help, thanks,Jason ... (cont.)

I am looking for all the parts for both right and left sides to open the side windows. The numbers I've found on the parts I can't see to find exactly 33177D I need the crank to open and close windows and the part that the latch grabs onto to lock it. I hope you can help because I've ordered parts t ... (cont.)

do you have this part for a weathershield casement window?

This is from a weathershield vinyl french casement. I don't know if they were considered Visions line at that time or not.

This I believe is a Roto window closer. The bottom right side slider cracked off. It's 7 3/4" long attached to window 5 1/4" bar attached to it which has the 3 3/4" black slider Do you have this or know the part number?

Hello,I am looking for two items. The balance attached (2 photos) and the arm (photo attached). These are for two seperate windows.Please call me if you have any questions.

I need the metal that goes on the bottom part that measured 10 inches and also the arms shown.

Looks came for the height of war of window

Hi, this is the plastic slider that attaches to the end of the hinge. Any idea if this is a part I can purchase? It's the black piece

Looking from the inside of the house at a double casement window, I need the lower hinge for the right window. It's the hinge used to crank the window open. The window is made by Simonton. Thanks for your help.

I am in need of this type of opener. The operating arm is stamped "Wright" & is approximately 14 inches long. Other information is also pictured in the other attachments; 358-1L & 30382- 358-1R.I am also in need of upper and lower hinge assemblies, if those parts can be suggested by these p ... (cont.)

Hi, I think I'm dealing with a right hand opening casement window. Truth entrygard would like a quote for the operator and some underneath parts (not sure what they are called. I think it's a Link Arm.The operator has this stamped : 1982 , truth entrygard , on the main plate near the gears is 10471. ... (cont.)

The window does not fully close at the bottom part of the window. the repair person says he can't find these parts anymore. He says he needs Sash, Hardware for hinge arm, sash pívot, rotor gear. The numbers on the parts are: EntryGard Truth Hardware 20755 40887 40941-A