Viewing all customer Discussions for:

39-253RB Encore Dual Arm Operator, Sill Mount

I'm looking to replace four broken window cranks but don't seem to find the exact match. I've included a picture.

Hello, I'm looking to replace the window crank sets, covers, handles, and locks for a right swing and left swing window all in beige. Thank you! - Amber

The part with the threads on it is a little too small for my window. Do you have a little bigger size?

I AM TRYING TO LOCATE TWO REPLACEMENT WINODW CRANK ASSEMBLY FOR A CASEMENT WINODW AS SHOWN IN THE ATTACHED PHOTOS, THAT OPEN THE LEFT AND RIGHT WINDOWS. THE ONLY MARKING ON THE OLD CRANK ARE NUMBERS:40447 AND 41012 AND A DATE 11/19/01. Other part # 31876,41012,40447 truth hardware.I just took out th ... (cont.)

Truth casement window operator The only number on operator is 31876

I am looking for a match for this Truth dual arm operator. Please see the picture with the measurements. Thank you!

Can I use the 39-253RB as a replacement for the casement arm as shown in the pictures? Do I need extra parts?

Something is striped on each window I can manually open each window about 3 inches then the crank will work out and in but it won't crank it to close the final 3 inches.it looks I need a dual arm right and left.I hope your able to help

The arm attached to the bottom of the window has rusted to the point it crumbles. No identifiers on window or crank arm assembly. The window was put in approx 20 years go.

The window crank becomes disengage from the window track guide there at the longer end, as if there is some type cap that is missing from the tip of the crank that is inserted into the window guide. If there is a replacement guide that for the bottom track of the window that can be replaced please i ... (cont.)

I need a whole new two point locking system with a 15" bar. Also the plastic clips that hold the bar in place. I also need 2 lh operators and 1 rh operator.

Need help identifying correct replacement part. Crank teeth are stripped, won't fully close. 14D599P stamped on arm. Thanks.

Trying to replace a Milguard Operator,part# HA-043-OP-SS-WH. Crank is on the left side from inside home

Righthand opening. Truth brand. I also need information to order the lefthand version of this. Thanks!

Good morning, I need assistance with casement cranks the arms/parts have the following numbers on it. S-1491-265 S-1491-260 1491-220B S1-1491-88 see image attached. Thank you, Blanca

This is a replacement operator for Hurd casement window I purchased a few years ago, that are no longer available. I need both left and right. The only thing it has stamped for identification is 10/19/16 19:47. The windows are from 1999. Thanks

Looking for this operator

Marked "Truth", but cannot find a part number. The arm falls off the track attached to underside of window when we crank it out( the longest arm of the unit). The arm is about 10 1/2" long. I maybe could find a part number if I knew where to look on the part. Thank you.

Need to find these

Looking to replace these as the gears are worn.