Viewing all customer Discussions for:

39-253RB Encore Dual Arm Operator, Sill Mount

The crank is not smooth. It jams up and there is a lot of play. Window from 2004. Insure of manufacturer. Looking for both left and rightOne arm has a stamp of 31858 and 31876

I need a window crack just like this except the crank needs to be on the right hand side of the case. Can you help please?

No marking on window frame or cranks. The crank works to open window but clicks and won't "catch" to fully close.

Hi, could I get a list of parts needed to replace the mechanism to open and close the window. I also would like to change the handle if it is possible to a folding type handle. Thank you Jeff

Need to assembly, right and left side. Any information would be appreciated! Thanks!

See in picks the brand an part number of window , need a crank assy for that window , believe it would be a left side open , with back to jam it goes left to open.

Will not fully close window. Stops at point shown

I am looking for replacement window operators. They look to be Truth 41011 and 41012 as seen stamped on the bottom of the operator arms. Do you carry this brand or anther like for like replacement?

Hi I have a client that is looking to replace some old non working actuators for their windows. Could not find any complete numbers on the arm. Found the name truth that is about it.

It looks like this window has two different operating cranks. The first one is left side and second photo is the right side. The name on them is Truth and on the second picture I see the numbers 30818.

I need 2 Operators as shown and 3 opposite. The straight arms are 9-1/2" to the wheel and the end section of the short arm is 4-15/16". My operator shown is stamped with S-1491-160, and the opposite is stamped with S-1491-265. 1 also need 1 beige lock as pictured on the left. I saw a discussion on ... (cont.)

Im looking for the correct cover and crank handle for this Mi casement window. The window is only a year or two old. I have some other casement windows that use crank handle and cover part number 39-376, but this one window has a different crank. Is this something you recognize? Thanks, Kaleb ... (cont.)

I need few of left and few of right swing with dual arm as in photos.

Works fine once it is clear of the jamb but just spins when closing tight or opening from closed.

Hello again, See attached photos of our latest failed operator. The unit is stamped with "Truth" and the number 41012. This is on a thru the sill mounting. I'd would like the white cover and a new gasket if that doesn't come with the crank assembly. Thanks you.

Hello. I need to get some replacement parts for a window. Pretty much need all the hardware shown as it has been super corroded. Please guide me to parts I would need. The crank is right sided. I believe its Encore need crank, cover, rails and slides. I have a few other photos if you need them as id ... (cont.)

I have multiple Milgard casement windows (34" x 46" and 34" x 58") with cranks on the right side and left side that need replacement. These are ~22 year old windows.

41011 on the long arm. 41008 and 31876 on the other 2 arm components.Hope this helps.Thanks

I'm looking for new hardwares for my PGT windows - operators and everything. I have approximately 35 casement windows total, combination of left hand and right hand. I would really like to get STAINLESS STEEL HARDWARES since I live near the beach and the existing hardwares have corroded to the poi ... (cont.)

Looking for this window crank. Partial number on gear casement is 03169. Brand is Truth.