Viewing all customer Discussions for:

39-239B Encore Awning Operator, Sill Mount

how do I remove the operator handle and cover?

Looking for this crank and handle in white. Please let me know if you have one and price for both crank and handle pleasenumbers on the arms are: 41013, 41016, 41010A, 31881

I need to replace this mechanism that opens and closes the PGT windows from the bottom center of the window. The outward extension is 16 inches when fully cranked out. The crank itself is 5 inches wide 2.5 inches deep and had a white cover and handle that covers it. I am looking to replace four o ... (cont.)

I need a replacement for the handles on the screen door. This is Makai door from discount windows and doors in Hawaii. I also need replacement parts for Pali window from discount windows and doors. I only need hardware for one of the windows because it's the only one I actually open. ... (cont.)

Believe that I have a Milgard window and looking to replace the rusted operator

Looking 1 awning operator, 6 LH casement, & 6 RH casement. They all seem to open but not close. Need a price for parts or list of what other info is needed. Thank you!

Truth parts 31707, 41013, 41016 and bronze handles with covers

I am needing to replace the crank operators for casement windows - there is no markings showing the brand. This one was manufactured 02-02-01. 1) How do I open/remove the cover - in photos it is white pained metal. Underneath, there are two round metal connectors of some type - not allen wrench - ... (cont.)

This building is from 1907

The window operator and handle for the awning window attached broke and need to be replaced. Do you carry these replacement parts and if so, what ae the part numbers? Unfortunately, I cannot locate the manufacturer information on the window. The contractor who installed it was able to tell me th ... (cont.)

Hello, so obviously the picture on the right is the crank the strip of metal on the left is the piece attached to the bottom of the window sash that the guides on the end of the arms to open and close the window

I need to replace the metal horizontal and vertical pieces that pushes the Milgard awning window out. Can I get that part number as it is currently rusted. Thanks

I need the plastic clip and guide exactly as seen in this picture. The two parts that connect to the window. The sill operator is fine.

I am looking for replacement window cranks for my Thermo Tech Awning windows that were originally purchased in 1999.

The 1st imagine is the part I am looking for. It is for a casement window that is 43" in width and the height is 26". Also, is it easy to fix? Thank you

Dual arm window operator.The actual window operator is 4" 15/16 Closed arms 15 1/4" and the following numbers 41010 A 31881 41013 41016

I have a 2001 Milgard Classic Awning Window with accordion extension arms. End of each arm has circular hole holding metal piece that slides in track on underside of window and is held in place by a plastic clip. Only the metal piece on end is damaged/broken/lost (operating arm, crank and handle ... (cont.)

No descriptions were found due to the condition of the unit.

I have older Truth Series 11 operators (close to your 39.348 item) and would like to update them. It looks like the Encore operator will fit with new mounting holes and a new track. Parts required per window are(?): 1 - 39-239B operator 1 - 39-375 handle/cover 1 - 39-556 16" track 2 - 39-536 pivot s ... (cont.)

the numbers are on the bottom piece shown in photo. I believe the window manufacturer was Atrium; they are about 12 years old now. I need to replace 6 of the arm operators. they have become corroded, and in one case the rivet in the arm sheared off Thank You..