Viewing all customer Discussions for:

32-053 Drawer Track Kit

Hi hoping you can help me find a replacement part for the white plastic piece in the photos. Or even if we can get the entire slide or rail piece. Any help is appreciated

Customer states her Drawer Runner has a wheel in it. Also, the Oval Rear Socket has an opening of 1 1/8".

I'd like to find out if this broken guide is a "regular" or something else. It does day Kenlin on it, but I don't see a part number. Age -- about 1980-83 Both the inner width of the track and the width of the guide bar seem to be 1" Since our nightstand and dresser drawers have often been overl ... (cont.)

The drawer width is: 34 1/4" The drawer center mount slides under the drawer is: 15 1/2" long The drawer center mount slides on the cabinet itself is: 16 1/2" long I'll need a whole cabinet drawer center mount slides with the case runner and heavy duty drawer sockets.

I need to replace broken Ronthor #3185530 drawer guide. I've found info on internet that your company may have part similar to this discontinued part. Please advise. Thank you!Linda

This is a 17" centermount drawer slide, attached to the bottom of the drawer. I have the part that attaches to the dresser, but missing one of these. Are they made anymore?

Hello!We have acquired a 1976 Thomasville dresser. All the drawers fall out when you open them. With difficulty we get the a drawer to get into the rail ? then it doesn't close all the way. Do we need to replace all of them or are we doing something wrong?Thank you!Lori

My bedroom furniture is at least 50 years old and the tracks holding the drawers are starting to fail. Need advise for replacement tracks as the rear drawer track "socket" attaches on the bottom as the picture shows. Thanks!

Several of the bottom center mount wooden drawer guides are broken. Need guidance in replacing. There is no back wooden panel so will need a guide that screws to rail. What do you recommend for the guide in the drawer? Thanks so much for your help. Louise Robinson

Attached photos. 1 of 4 plastic rails that slide over wooden rail in dresser. These are Attached to the bottom of each drawer. Part # 3185530. Would I need to replace the whole assembly or use just white plastic part 32-031 by itself. Appreciate your feedback. Thanks Czar

I have this dresser but all the plastics broke. I am having a hard time identifying the names or Part number.

Hello, First, thanks for shipping so quickly. I tried installing the 32-082 to replace those in the picture, but they don't fit. I'm not sure if I'm not pushing in hard enough but the 32-082 does not fit flush on my drawer. I watched the video, but it didn't show how the socket fits into mate. Did ... (cont.)

I'm looking for a new guide rail about 14 inches long and 1 1/4 wide

I have a 6 drawer Thomasville dresser that has a drawer slides that have the sliding ball bearing piece that slides inside the dresser from the front of the slide to half way. Summer broken summer missing all together. Then on the drawer itself on the back of the slide there's a piece that seems we ... (cont.)

Please identify these kitchen drawer parts. See attached pictures.

I have a broken dresser and need replacement parts.

I need a top monorail that a plastic drawer insert fits on

Thanks. I need at least one of these drawer guides and maybe 2-3 just in case the others break. Thank you

I have a an old dresser that has middle drawer slider made of plastic that are broken and need to be replaced. I have not been able to find it online. The wooden part of the slider that is attached to the bottom of the drawer cavity still in place and in good conditions, but the plastic slider tha ... (cont.)

Bathroom vanity drawer broke. Looking to replace the plastic backplate. It is part #295.621-01.22 >pa66The length of the bottom rail as shown is 17 5/8 inches. The length of the top rail that slides over it is 18 1/2 inches.