Viewing all customer Discussions for:

32-058 15-3/4" Self-Closing Drawer Slide Pair

Corner mounted bracket for kitchen drawer, wheel has broken off, will need both corners. Top of bracket to center of wheel is about 2.5". Happy new year!

I have looked at your dimensions on 32-018 which handles a slide 7/8 inch tall and 32-089 handles 1 inch slide. I need 1 1/8 inch for my slide to clear. Is there a brace that will handle that?

Kent Moore Cabinets. The part does not use screws. It attaches to two holes at the back of the cabinet. One drawer fall. The others have not but most are damaged. I would like to get parts for 6 drawers.

I need to purchase a set of these

Miss one bracket need to find something that would work

I ordered the wrong rear track socket pair for my Brandon cabinets. The rear drawer socket I need has an extra groove for the track to slide in. Attached is the screen shot of what I ordered, pictures of the broken socket, and the rear end of the drawer guide rail. Do you have a rear drawer sock ... (cont.)

This hardware is 15 and 1/2 inches long. I'll take the whole thin but only need the wheel. Can you advise as to a part number that will work for me? I see no part number that I can find on the metal slide.

Kitchen Cabinet Drawer Track Back Plate Bracket 3/8" Groove x 1" Height Inner Sir I need Drawer Rear end Bracket to hold Sliding Drawer in Kitchen Cabinet to replace broken parts. I 4 or 5 pairs Please kindly helpW

The slide is craked and the draw sticks.

I was given these chest of drawers missing one slide/guide from the right hand side looking from the front. I included stickers on the back of the dresser as well as a picture of an existing slide/guide and it's length. Thanks, Dave

I tried to upload a picture but it wouldn't allow me. I need the piece that attaches with pegs into the back of the cupboard and holds the drawer slides up and stops it.

I'm looking for the mirror image match for this roller. This is from the right rear of the drawer as seen from the back. I need its mate, to go on the other corner, so the roller projects to the left side of the drawer (as seen from the back). All it says on the bracket is "GRANT DR." I've been to ... (cont.)

The back mounting bracket broke. Cant find.

I need to replace the small brown plastic bracket in our kitchen lower cabinet. The cabinets are no longer being made and Home Depot and Ace Hardware did not have anything similar that would allow us to use the sliding drawer/shelf. Please let us know if you have a mechanism that is similar. Or perh ... (cont.)

The top of my plastic rear support has broken. This makes my drawer wiggle and dangerous to pull out as is is not stable in the rear. Lowe's does not have this unique size. The back rectangular shape is 2" x 1 1/8. The length is 3" 5/8 . Across the front opening is 1" 1/4, but the actual opening for ... (cont.)

I'm looking for a drawer socket to accommodate the narrow flange that reaches down from the bottom of our track. We have several drawers that are failing.

I'm looking for an under mount drawer guide that will replace a Mepla 2035/572. Do you have anything like that? The measurement from the back of the drawer front to the back of the drawer box is 20.75". The measurement from the front of the cabinet face to the back wall of the cabinet is 23.5". This ... (cont.)

Need this part

Bottom slide that is attached to the drawer

Need replacement sockets for 25+ yr old hardware that has 1 1/4" tall drawer tracks. Do you have sockets that accept these older (and larger) tracks? Seems that current standard is just 1" tall.